Philips MZ7 User Manual download pdf (Page 7)

7

English

3139 116 19161

A AM Loop Antenna

Connection

Connect the supplied loop antenna to the

AM ANTENNA terminal. Place the AM loop

antenna far away from the system and

adjust its position for the best reception.

B FM Wire Antenna

Connection

Connect the supplied FM wire antenna to

the FM ANTENNA 75 Ω terminal. Adjust

the position of the FM antenna for the best

reception.

Outdoor Antenna

For better FM stereo reception connect an

outdoor FM antenna to the FM ANTENNA

75 Ω terminal using a 75 Ω coaxial wire.

C Speakers Connection

• Connect the right speaker to Front

terminal R, with the coloured wire to +

and the black wire to -.

• Connect the left speaker to Front

terminal L, with the coloured wire to +

and the black wire to -.

• Clip the stripped portion of the speaker

wire as shown.

unlock lock

12 mm

D Subwoofer Out Connection

Connect the optional active subwoofer to

the SUBWOOFER OUT terminal. The

subwoofer reproduces just the low bass

effect (e.g. explosions, the rumble of

spaceships, etc.). Be sure to follow the

instructions supplied with the subwoofer.

E Line Out Connection

(wireless

ready)

You can connect the audio left and right

LINE OUT terminals to a optional CD

Recorder ANALOGUE IN terminals. This

allows you to record in an analogue format.

You can also install additional optional

front active speakers away from the

system (e.g. in another room) to reduce the

inconvenience of running long speaker

wires across rooms. You can place as many

remote speakers as you like provided they

operate at the same radio frequency.

Connect the wireless radio frequency

transmitter to the LINE OUT terminals.

Place the active speakers at your preferred

location. Be sure to follow the instructions

supplied with the active speakers.

Note:

– Availability of a wireless transmitter and its

peripherals is subjected to the approval of

local authorities. Please check with your

local safety or approving authority.

PREPARATION

F Digital Out Connection

You can record the digital sound from the

CD, through this output, on any audio

equipment with digital input (e.g. CD

Recorder, Digital Audio Tape (DAT) deck,

Digital to Analog Converter and Digital

Signal Processor).

Connect one end of the cinch cable (not

supplied) to the DIGITAL OUT socket and

the other end to the audio equipment with

digital input.When connecting the cinch

cable, make sure it is fully inserted.

G Connecting other

equipment to your system

You can connect the audio left and right

OUT terminals of a TV, VCR, Laser Disc

player, DVD player or CD-Recorder to the

AUX/CDR IN terminals at the rear of the

system.

H AC Power Supply

After all other connections have been

made, connect the AC power cord to the

system and to the wall outlet.

Inserting batteries into the

Remote Control

• Insert the batteries (Type R06 or AA)

into the remote control as shown in the

battery compartment.

+

-

+

-

• To avoid damage from possible battery

leakage, remove dead batteries or

batteries that will not be used for a long

time. For replacement, use type R06 or

AA batteries.

1 2 3 4 5 6 7 8 9 10 11 12 ... 25 26

Comments to this Manuals

No comments