Philips MZ7 User Manual download pdf (Page 16)

16

English

3139 116 19161

TUNER

Storing Preset Stations

You can store up to 40 radio stations in the

memory. When a preset radio station is

selected, the preset number appears next

to the frequency on the display.

Automatic programming

1 Press TUNER.

2 Press PROGRAM for more than one

second.

™ The PROGRAM flag starts flashing and

“AUTO” will be displayed.

™ The system will search for every

available station in the FM waveband

first, then search by the MW and LW

wavebands.

™ All available radio stations will be

stored automatically. The frequency

and preset number will be displayed

briefly.

™ The system will stop searching when

all the available radio stations are

stored or when the memory for 40

preset radio stations is used.

™ The system will remain tuned to the

last stored preset radio station.

Notes:

– You can cancel the automatic

programming by pressing PROGRAM or

STOP (on the system only).

– If you want to reserve a section of

preset numbers, for example preset

numbers 1 to 9, select preset 10 before

starting automatic programming: only

the preset numbers 10 to 40 will be

programmed.

Manual programming

1 Press TUNER.

2 Press TUNER again to select the

desired waveband : FM, MW or LW.

3 Press PROGRAM for less than one

second.

™ The PROGRAM flag starts flashing.

™ The next available preset number will

be displayed for selection.

4 Press TUNE S or T

(or

à

/

á

on the remote control)

to tune to the

desired frequency.

• If you wish to store the radio station to

another preset number, first select

PRESET mode, then press PRESET 4

or 3 to select the desired preset

number.

™ The PRESET flag will be displayed.

5 Press PROGRAM again.

™ The PROGRAM flag disappears and the

radio station will be stored.

• Repeat the

steps 3 to 5

to store other

preset radio stations.

Notes:

– When 40 radio stations are stored and

you attempt to store another radio

station, the display will show"

FULL

”.

If you want to change an existing preset

number, repeat steps 3 – 5.

– You can cancel manual programming by

pressing STOP (on the system only).

– During programming, if no button is

pressed within 20 seconds, the system

will exit program mode automatically.

– When in programming mode, the

PRESET mode will automatically be

activated.

Tuning to Preset Radio

Stations

1 Press PRESET to switch on the PRESET

mode.

™ The PRESET flag will be displayed.

2 Press PRESET 4 or 3

(or

í

/

ë

on

the remote control)

to select the desired

preset number.

™ The preset number, radio frequency,

and waveband appear on the display.

Receiving RDS Radio Station

Ç

RDS (Radio Data System) is a broadcasting

service that allows FM stations to send

additional information along with the

regular FM radio signal. This additional

information can contain:

• STATION NAME: The radio station

name is displayed.

• PROGRAM TYPE: The following

program types exist and can be received

by your tuner: News, Affairs, Info, Sport,

Educate, Drama, Culture, Science,

Varied, Pop M, Rock M, M.O.R. (middle

of the road music), Light M, Classics,

Other M, No type.

• RADIO TEXT (RT): text messages

appear in the display.

When you have tuned to a RDS station, the

RDS logo (Ç) and the radio station name

will appear on the display:

• The display normally shows the radio

station name if available.

By repeatedly pressing RDS button you

can change the type of display

information:

™ The display shows in turn:

STATION NAME ™

PROGRAM TYPE ™ RADIO

TEXT ™ STATION NAME ...

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 25 26

Comments to this Manuals

No comments