Philips CED1900BT User Manual download pdf (Page 23)

22 EN

13 Troubleshooting

Warning

•

Never remove the casing of this product.

To keep the warranty valid, never try to repair the product

yourself.

If you encounter problems when using this product, check

the following points before requesting service. If the problem

remains unsolved, go to the Philips Web page (www.philips.

com/support). When you contact Philips, make sure that the

product is nearby and the model number and serial number

are available.

General

No power

• Car engine has not been started. Start the car engine.

• Connections are incorrect.

• The fuse has been damaged. Replace the fuse.

No sound

• Volume is too low. adjust the volume.

• Speaker connections are incorrect.

No response to the remote control

• Make sure that the path between the remote control

and the unit is clear from obstacles.

• Move the remote control close to the unit, and point it

at the iR sensor.

• Press

to switch to the control interface for front

source or rear source.

• The function is not applicable to the current media.

• Replace the remote control battery.

The disc does not play.

• The disc is upside down. Make sure that the printed

side is upwards.

• The disc is dirty. Clean the disc with a clean, soft, lint-

free cloth. Wipe the disc outwards from the center.

• The disc is defective. Try another disc.

• The disc is incompatible. Try another disc.

• The recordable disc is not nalized.

• The region code of DVD disc is not supported. Use a

disc with proper region code.

CannotplayDivXlefromanSD/SDHCcardorUSB

storage device

• DivX DRM protected les cannot be played if they are

saved on an SD/SDHC card or USB storage device.

Transfer it to a compatible disc instead.

No image

• Parking wire connection is incorrect. Check the wiring.

No image on rear monitor

• Enable the signal transferring to rear monitors.

• A DivX video can be played for front passengers only.

Imageashesorisdistorted.

• Video connection is improper. Check the connections.

Noise in broadcasts

• Signals are too weak. Select another station with

stronger signals.

• Check the connection of the car antenna.

Presetstationsarelost.

• Battery cable is not correctly connected. Connect the

battery cable to the terminal that is always live.

The fuse is broken.

• The fuse type is incorrect. Replace it with a 15 A fuse.

• Speaker wire or power wire is grounded. Check the

connections.

About the Bluetooth device

Music playback is unavailable on the system even after

successful Bluetooth connection.

• The device cannot be used with the system to play

music.

The audio quality is poor after connection with a

Bluetooth-enabled device.

• The Bluetooth reception is poor. Move the device

closer to the system or remove any obstacle between

the device and the system.

Cannot connect with the system.

• The device does not support the proles required for

the system.

• The Bluetooth function of the device is not enabled.

Refer to the user manual of the device to nd out how

to enable the function.

• The system is not in the pairing mode.

• The system is already connected with another

Bluetooth-enabled device. Disconnect that device or all

other connected devices and then try again.

The paired mobile phone connects and disconnects

constantly.

• The Bluetooth reception is poor. Move the mobile

phone closer to the system or remove any obstacle

between the mobile phone and the system.

• Some mobile phones may connect and disconnect

constantly when you make or end calls. This does not

indicate any malfunction of the system.

• For some mobile phones, the Bluetooth connection

may be deactivated automatically as a power-saving

feature. This does not indicate any malfunction of the

system.

1 2 ... 18 19 20 21 22 23 24 25 26

Comments to this Manuals

No comments

Philips CED1900BT User Manual Page 23

Comments to this Manuals

Related products and manuals for Car media receivers Philips CED1900BT