Philips SCD570/10 User Manual download pdf (Page 18)

Sound alert on/off

Note: You can only switch the sound alert on and off in the menu of the parent unit.

This feature allows you to monitor your baby silently. It enables you to switch off the volume on

your parent unit and still be alerted if your baby cries.

If the sound alert is switched on, the parent unit beeps as soon as the fourth sound level light lights

up while the volume is switched off. In addition, the backlight of the parent unit display goes on and

the sound alert symbol ( g) ashes on the display.

1 Select ‘Alert settings’ with the + and - buttons (Fig. 33).

2 Press the OK button to conrm.

3 Select ‘Sound alert’ with the + and - buttons.

4 Press the OK button to conrm.

5 If the alert is off, the display shows ‘On?’. Press the OK button to switch on the alert. If the

alert is on, the display shows ‘Off?’. Press the OK button to switch off the alert.

, If you have set the sound alert to ‘on’, the sound alert symbol ( g) appears on the display

of the parent unit.

Setting room temperature range

Note: You can only adjust the temperature range in the menu of the parent unit.

A baby will sleep comfortably in a room heated to a temperature between 61°F (16°C) and 68°F

(20°C). This is important, since a baby cannot regulate its body temperature as well as an adult. A

baby needs more time to adjust to temperature changes.

If you do not set a temperature range, the baby monitor alerts you when the temperature in your

baby’s room drops below 57°F (14°C) or rises above 86°F (30°C). In this case, the backlight of the

parent unit display goes on and ‘High’ or ‘Low’ appears on the display. To change the default

minimum and maximum temperature, follow the instructions below.

Note: The temperature of the baby’s room is shown on the display of both units when they are linked.

1 Select ‘Temperature’ with the + and - buttons (Fig. 33).

2 Press the OK button to conrm.

3 Select ‘Range’ with the + and - buttons.

4 Press the OK button to conrm.

5 Set the desired minimum temperature with the + and - buttons.

6 Press the OK button to conrm.

7 Set the desired maximum temperature with the + and - buttons.

8 Press the OK button to conrm.

, The message ‘Saved’ appears on the display.

Temperature alert on/off

Note: You can only switch the temperature alert on and off in the menu of the parent unit.

Note: If the temperature alert is activated too often, reduce the set minimum temperature and/or

increase the set maximum temperature (see ‘Setting room temperature range’).

If the temperature alert is switched on, the parent unit beeps if the actual room temperature

exceeds the set maximum temperature or drops below the set minimum temperature. In addition,

the backlight of the parent unit display goes on, the temperature alert symbol ( t) ashes and ‘High’

or ‘Low’ appears on the display. If no minimum and maximum temperatures have been set, the

ENGLISH18

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 71 72

Comments to this Manuals

No comments

Philips SCD570/10 User Manual Page 18

Comments to this Manuals

Related products and manuals for Baby video monitors Philips SCD570/10