Philips SM30 User Manual download pdf (Page 49)

47

14.3.4 MUSIC ROUTING

4.1 Main menu selection

Select from the main menu by means of the

left/right arrow keys:

MUSIC ROUTING.

4.2 Zone selection

The current music routing will be displayed.

Zones which are already selected are

indicated on the display by 1, not selected

zones are indicated by a 0.

The lower right of the display shows the

number of the zone indicated by the cursor

position. Moving the cursor to another zone

can be done with the left/right arrow keys.

Shifting the cursor to the right, further than

the last position, will display the routing of

zones 7-12, if Zone Relay Module 2 is

present. Shifting the cursor to the right

again, further than the last position, will

display the routing of zones 13-18, if Zone

Relay Module 3 is present. If only Zone

Relay Modules 1 and 3 are present, the

routing of zones 13-18 will be displayed

instead of 7-12. Selecting a zone can be

done with the ‘|’ key, deselecting a zone can

be done with the ‘O’ key.

Return to ‘RUN’ mode

User Programming is now completed.

Pressing BREAK will exit the user

programming mode, and return to the

normal ‘RUN’ mode.

14.4 ERROR MESSAGES

During normal operation, all modules

present in the system are continuously

tested. If a module stops communicating

with the processor, a message is sent to the

display stating the faulty module type and

the module number. If a Call Station stops

communicating with the system, this is also

displayed. If a Control Relay Module is

present, an SM30 system fault will

deactivate relay 1, providing the possibility

to switch on a remote warning light, buzzer,

etc..

** ERROR **

CALL STATION:XX

MUSIC INPUT MOD

LINE OUTPUT MOD

CST INPUT MOD XX

MIC INPUT MOD XX

ZONE REL. MOD XX

CTL RELAY MOD

REC MESSAGE MOD

CTL INPUT MOD XX

If more then 1 error occurs, the different

messages will be displayed sequentially.

When the Recorded Message Module is

installed, but the mode switch is not set in

the ‘SYS’ position, the following message

will be displayed:

** ERROR **

MESSAGE MODULE

SWITCH POSITION

Music Routing

SELECT PROGRAM :

MUSIC ROUTING

MUSIC ROUTING

000000 ZONE : 01

1

2

4

GB/SM 30 user manual 5/26/98 10:18 AM Page 47

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 71 72

Comments to this Manuals

No comments