Philips AC1215/20 User Manual download pdf (Page 13)

7 To reattach the front panel, press

the top part of the panel onto the

top of the air purifier (1). Then,

gently push the panel against the

body of the air purifier (2) (Fig.l).

8 Put the plug of the air purifier in the

electrical outlet.

9 Touch the for 3 seconds to reset

the pre-filter cleaning time (Fig.{).

10 Wash your hands thoroughly after

installing filters.

Cleaning the pre-lter

Note

• This is for AC1215 only.

Clean the pre-filter when F0 is displayed

on the screen (Fig.y).

1 Switch off the air purifier and

unplug from the wall outlet.

2 Pull the bottom part of the front

panel and then gently lift to remove

it from the air purifier (Fig.c).

3 Press the clip down (1) and pull the

pre-filter towards you (2) (Fig.d).

4 If the pre-filter is very dirty, use a

soft brush to brush away the dust.

Then wash the pre-filter under

running tap water (Fig.z).

5 Allow the pre-filter to air dry

thoroughly before placing back in

the air purifier.

Note

• To optimize the lifetime of the pre-

filter, make sure it dries completely

after cleaning.

• Wash your hands after handling the

filter.

6 Put the pre-filter back into the air

purifier (Fig.k).

Note

• Make sure the side with the clip is

pointing towards you, and that all

hooks of the pre-filter are properly

attached to the air purifier.

11EN

English

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 65 66

Comments to this Manuals

No comments