Philips MCD703-37 User Manual download pdf (Page 35)

35

English

The aspect ratio of the screen cannot be

changed even though you have set the TV

shape.

No sound or distorted sound.

The micro DVD player does not start

playback.

The DVD micro system does not respond

when the buttons are pressed.

Cannot activate some features, such as

Angles, Subtitles, or multi-language

Audio.

Considerable noise in radio broadcasts.

Sound cannot be heard or is of poor

quality.

✔ The aspect ratio is fixed on the DVD disc.

✔ Depending on the TV, it may not be possible to

change the aspect ratio.

✔ Adjust the volume.

✔ Check that the speakers are connected

correctly.

✔ Replace the speaker cables.

✔ Disconnect the headphones.

✔ The system is in pause, slow motion or fast

forward/reverse mode, press PRESET/ÉÅ (or

ÉÅ on the remote) to resume normal play

mode.

✔ Insert a readable disc with the playback side

facing down.

✔ Check the disc type, colour system and regional

code. Check for any scratches or smudges on

the disc.

✔ Press SYSTEM MENU to turn off the setup

menu screen.

✔ Cancel the parental control rating function or

change the rating level.

✔ Moisture has condensed inside the system.

Remove the disc and leave the system turned

on for about an hour.

✔ Disconnect the power plug from the outlet and

insert again.

✔ Multi-language sound or subtitle is not

recorded on the DVD.

✔ Changing the language for the sound or subtitle

is prohibited on the DVD.

✔ The features may not be available on the disc.

✔ Tune in to the correct frequency.

✔ Connect the antennas.

✔ Fully extend the FM wire antenna. Position for

best reception and secure to a wall.

✔ Connect an outdoor FM or AM antenna.

✔ Adjust the direction and position for best

reception.

✔ Place the antenna farther away from any

equipment that may be causing the noise.

✔ Increase the distance between the system and

your TV or other equipment.

pg001-038_MCD703_37_Eng 2006.2.14, 11:0835

1 2 ... 30 31 32 33 34 35 36 37 38

Comments to this Manuals

No comments