Philips M1351A User Manual download pdf (Page 48)

Configuring the Monitor Using a PC

38 Chapter 4 Configuring the Monitor

Printing the Error Log

To print the error log, complete the following steps:

1. Disconnect all transducers from the monitor and disconnect or switch off Telemetry.

2. Switch on the recorder.

3. Press and

Test at the same time:

C01 is shown in the US1/US display.

0 or 1 is shown in the Toco display.

4. Press again to select the Service Function Menu:

A01 (Print the Error Log) is shown in the US1/US display.

5. Press to print the error log. The display shows:

nnn nnn nnn

The following table lists the error log and permanent test functions, and their

corresponding menu numbers.

Figure 4-3 Example of an Error Log

Table 4-4 Service Function Menu Numbers and Error Log Functions

Menu No. Function

A01 Print the Error Log

A02 Clear the Error Log

A03 Start the Permanent Test

503 0001 91/05/12 17:33 91/05/12 17:33

510 0010 91/05/12 17:36 91/05/17 10:45

504 0001 91/05/12 17:33 91/05/12 17:33

506 0010 91/05/12 17:36 91/05/17 10:45

FIC

C1C4 0001 91/05/12 17:33 91/05/12 17:33

C146 000A 91/05/12 17:36 91/05/17 10:45

02/18/91 A.01.00 M1351A 3028G00203

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 188 189

No comments

Philips M1351A User Manual Page 48