Philips STU909 User Manual download pdf (Page 12)

Configuration Antenna 2

O Follow the same procedure for the dish connected to INPUT 2 as described

under CONFIGURATION ANTENNA 1.

Adjusting the polarizer settings

The polarizer settings are pre-programmed at the factory. However, due to

local conditions, it might be necessary to deviate from these settings.

The overall Polarizer Adjustment menu enables you possiblility to change the

polarizer settings for all satellite programmes in one go.

This menu is displayed only if the pulse or magnetic polarizer is selected in

the CONFIGURATION ANTENNA menu.

The STU 909 allows you as well to programme the polarizer setting for each

satellite programme individually (fine tune: SKEW) - see section 10.

CONFIGURATION ANTENNA 2

1 POLARIZER TYPE > MAGNETIC <

2 LNC POWERED BY TUNER ■»YES<

3 DUAL BAND LNC >NC*<

select:

O Press 6

l> The OVERALL POLARIZER SETTINGS menu appears on the screen.

O Select by pressing 1,2,3 or 4 the polarisation as indicated in the OSD

information at top left.

The highest signal strength, and best picture and sound quality, are selected

by pressing - or +.

Note:

Using programme

you can select programmes transmitted in other

polarizations.

Using <—i—> you can select another satellite if required.

O Press MENU.

Rotation limit (East-West)

Note:

Only available if an automatic antenna positioner (i.e. SCO 209) is connected.

To align the dish and set satellite positions, please refer to the instruction

manual of the antenna positioner.

OVERALL POLARIZER SETTINGS

SIGNAL STRENGTH 1212

POLARIZATION

1 HORIZONTAL

2 VERTICAL

3 LEFT HAND CIRCULAR

4 RIGHT HAND CIRCULAR

select; 1 • 4. % +. menu, off

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 26 27

No comments

Philips STU909 User Manual Page 12