Philips SBC RU640/00 User Manual download pdf (Page 4)

Punch-Through Sound

Punch-through sound enables you to control the audio level of

your first or second TV, regardless of what device mode the

remote control is in.

EXAMPLE:

You have installed a second TV under SAT mode. You can

control that TV’s volume when you are in VCR mode. This

feature is installed as a default setting for a first TV.

To install this feature for a second TV:

1 Press the mode selector key to select VCR.

2 Press and hold keys 1 and 6 simultaneously -for about 3

seconds - until the green LED lights up.

3 On the keypad, press keys 9, 9, and 3.

4 Press the mode selector key to select SAT (second TV).

5 Press the power key.

– That’s it! The LED flashes twice to indicate successful set

up.

The Volume up/down keys now control the volume of your

second (SAT) TV when you’re in VCR mode.

Functional back-lighting

When you pick up the SBC RU640 and tilt it over about 60

degrees, the main keys for the device you want to operate are

automatically back-lit.

In VCR mode for example, only the main keys that are needed

to operate the VCR are back-lit.

You can choose to have all of the keys back-lit, or you can

switch off the functional back-lighting feature completely.

To back-light all of the keys:

• Press keys 1 and 9 simultaneously - for about 3 seconds -

until the green LED flashes twice.

– The functional back-lighting is now de-activated and all

keys light up when you pick up the remote control.

Pressing keys 1 and 9 simultaneously again - for about 3

seconds - will return the back-lighting to its preset functional

setting.

OTE

The back-lighting turns off if you don’t move the remote control

or if you don’t press a key within 4 seconds.

Instructions for use

English

ADVANCED TIPS AND TRICKS

A DVICE

Carefully read the complete procedure before starting!

Changing the device keys

With the mode selector it is possible to select 4 categories of

devices you want to operate. Each category (TV, VCR, SAT and

AUDIO) is meant to operate a specific group of equipment:

TV VCR SAT AUDIO

tv vcr sat CD

laserdisc cable

dvd

Once you have programmed the functions of a device in one

of the categories, it is not possible to program another device

in the same category. There is, however, a solution in case

you want to program two devices in the same category

(2 TV’s, VCR’s, etc.). The following example explains how.

EXAMPLE:

The SAT mode on this remote control is factory preset to

control many Philips satellite receivers. You can change the

SAT mode (or any mode) to operate another type of device.

The following example shows you how to use the SAT mode to

operate a second TV:

1 Press the mode selector key to select SAT and make sure

the second TV is switched on.

2 Press and hold keys 1 and 6 simultaneously - for about 3

seconds - until the green LED lights up.

3 On the keypad, press keys 9, 9 and 2.

4 Press the mode selector key to select TV mode.

5 Press key 1.

– The LED flashes twice to indicate successful set up.

That’s it!

Don’t forget to set up the SBC RU640 to operate this second

TV. See the section Set-up for use.

Instructions for use

English

VCR

SAT

AUDIO

VCR

SAT

AUDIO

VCR

SAT

AUDIO

VCR

SAT

AUDIO

1 2 3 4 5 6 7 8 9 ... 39 40

Comments to this Manuals

No comments

Philips SBC RU640/00 User Manual Page 4

Comments to this Manuals

Related products and manuals for Remote control Philips SBC RU640/00