Philips 42PFL3704D/F7 User Manual download pdf (Page 10)

English

Connect a set-top box through RF IN/OUT

If the TV is connected to a cable box or satellite set-top box via a

coaxial connection, set the TV to channel 3 or 4, or to the channel

speciﬁ ed by the service provider.

32PFL3504D / 32PFL3514D

42PFL3704D

Connect to an antenna

Any DTV programs that are broadcast in your area can be received for

free through an antenna connection.

Contact your local content provider or your local electronics retailer if

you are unsure about what HDTV programs are available in your area.

Broadcasters are transitioning from analog to digital TV. This means that

a given broadcaster can have channels available either in analog or in

digital, or both analog and digital at the same time.

The TV produces stereo sound only if a stereo signal is broadcast.

Connect to a cable

When your TV is connected to the cable socket, you might receive free

digital and high deﬁ nition programs (depending on your cable provider).

The channel number for digital and high deﬁ nition channels includes a

dot “.” For example, 11.1, 46.30, 108.201. Contact your cable provider

for more information.

Connect to a Direct Broadcast Satellite (DBS)

There are two main DBS systems: DirecTV and DishNetwork. These

systems require a separate, proprietary set-top box to decode signals

and send them to the TV. The set-top box contains a digital TV tuner for

receiving off-air digital broadcasts.

Contact your local DBS provider for more information about the

connections and the TV channels.

Connect to a set-top box

A cable box or satellite set-top box can be connected to the TV

through the following connections:

• ANT

• A/V (Composite Video and Audio)

• S-Video

• YPbPr (Component Video Input)

• HDMI

For information about how to connect a set-top box, see the Quick

Start provided.

1 ... 9 10 11 ... 42

No comments

Philips 42PFL3704D/F7 User Manual Page 10