Philips BTD2180/12 User Manual download pdf (Page 14)

12 EN

Turn on

• Press .

» The unit switches to the last selected

source.

Switch to standby mode

• Press again to switch the unit to standby

mode.

» Theclock(ifset)isdisplayedonthe

panel.

To switch to ECO standby mode:

• Press and hold

for more than two

seconds.

» The display panel is dimmed.

Note

•

The unit switches to Eco Power Standby mode after 15

minutes in standby mode.

To switch between standby mode and ECO

standby mode:

• Press and hold

for more than two

seconds.

Find the correct viewing

channel

1 Press SOURCE repeatedly to switch to

the disc source.

2 Turn on the TV and switch to the correct

video-in channel in one of the following

ways:

• Go to the lowest channel on your TV,

and then press the Channel Down

button until you see the blue screen.

• Press the source button repeatedly on

the remote control of your TV.

Tip

•

The video-in channel is between the lowest and highest

channels and may be called FRONT, A/V IN, VIDEO etc.

See the TV user manual on how to select the correct

input on the TV.

Select the correct TV system

Change this setting if the video is not displayed

correctly. By default, this setting matches the

most common setting for TVs in your country.

1 Press .

2 Select [Setup] -> [Video] -> [TV System].

3 Select a setting and press OK.

• [PAL] - For TV with PAL color system.

• [Multi] - For TV that is compatible with

both PAL and NTSC.

• [NTSC] - For TV with NTSC color

system.

4 To return to the previous menu, press .

5 To exit the menu, press .

Change system menu

language

1 Press .

2 Select [Setup] -> [General] -> [OSD

Language], and press OK.

3 Select a setting and then press OK.

4 To exit the menu, press .

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 31 32

Comments to this Manuals

No comments

Philips BTD2180/12 User Manual Page 14

Comments to this Manuals

Related products and manuals for Home audio sets Philips BTD2180/12