EN User manual 3 MS-MY Manual pengguna 3 ZH-TW 使用手冊 3 Register your product and get support atwww.philips.com/welcome BDP7300
10 Connect video/audio cables Connect this Blu-ray disc player to TV to view disc play. Select the best video connection that the TV can support
11 Option 2: Connect to the component video jack 1 Connect the component video cables (not supplied) to the Y Pb Pr jacks on this player
12 Route audio to other devices Route the audio from this Blu-ray disc player to other devices to enhance audio play. Connect to multi-channe
13 Connect to analog stereo system 1 Connect the audio cables to the AUDIO OUT L/R - AV OUTPUT jacks on this player and the AUDIO in
14 Connect power cord Warning Risk of product damage! Ensure that the •power supply voltage corresponds to the voltage printed on the back or th
15 Navigate through the menu 1 Point the remote control directly at the remote sensor on the product and select the desired function. 2 Pr
16 Select menu display language Note Skip this setting if this Blu-ray disc player is •connected to a HDMI CEC compliant TV. It switches automat
17 Use Philips EasyLink Your product supports Philips EasyLink, which uses the HDMI CEC (Consumer Electronics Control) protocol. EasyLink-compli
18 Information on disc contents The contents of a disc are generally divided into sections or folders (groups of titles/fi les) as shown below.
19 Change video play 1 Play a title. 2 Use the remote control to change the video play. Button Action AUDIO Selects an audio language o
20 Quick skip to a specifi c time 1 During play, press OPTIONS . The play options menu is displayed. » 2 Select [Time Search] in t
21 Enjoy BONUSVIEW For a disc compatible with the BONUSVIEW or Picture-in-Picture feature, you can instantly view additional content (such as comm
22 Play music Control a track 1 Play a track. 2 Use the remote control to control the track. Button Action Pauses play. Starts
23 Note You may require longer time to display the disc •content on the TV due to the large number of songs/photos compiled onto one disc/USB device.
24 Play from USB device Play or view MP3, WMA/WMV, DivX (Ultra) or JPEG fi les on the following USB devices: fl ash drive• memory card r
25 [Audio] Selects the default audio language for disc play. [Subtitle] Selects the default subtitle language for disc play. [Disc
26 Note If the setting is not compatible with the TV, a •blank screen appears. Wait for 15 seconds for auto recovery. [Picture Settings] Se
27 [HDMI Audio] Selects the HDMI audio output when you connect this player and the TV/audio device with a HDMI cable. • [Bitstream] – Sel
28 Preference Setup 1 Press . 2 Select [Settings] , then press OK . 3 Select [Preference Setup] , then press . Video SetupAd
29 [Auto Standby] Turns off or turns on standby switching mode. It is an energy saving feature. • [On] - Switches to standby after 30 minu
3 7 Additional Information 32 Update software 32 Care 32 Specifi cations 33 8 Troubleshooting 34 9 Glossary 36 Contents
30 Advanced Setup 1 Press . 2 Select [Settings] , then press OK . 3 Select [Advanced Setup] , then press . Video SetupAdvance
31 [Version Info.] Displays the software version of this Blu-ray disc player. Tip This information is required when you want •to fi nd out if a
32 3 Insert the USB fl ash drive to this player. 4 At Home menu, select [Settings] > [Advanced Setup] > [Software Download] > [
33 Digital output: 0.5 Vp-p (75 ohm)• Optical (BDP7300 only), Coaxial• HDMI output• Sampling frequency:• MP3: 32 kHz, 44.1 kHz,
34 Picture No picture. See TV manual for correct video input • channel selection. Change the TV channel until you see the Philips screen.
35 The contents of the USB fl ash drive cannot be read. The USB fl ash drive format is not •compatible with this product. Drive is formatted with di
36 9 Glossary A Aspect ratio Aspect ratio refers to the length to height ratio of TV screens. The ratio of a standard TV is 4:3, while the
37 H HDCP High-bandwidth Digital Content Protection. This is a specifi cation that provides a secure transmission of digital contents between diffe
© 2008 Koninklijke Philips Electronics N.V.All rights reserved.Document order number: 000000000000000
4 Copyright notice This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and ot
5 Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,33
6 BONUSVIEW/PIP (Picture-in-Picture) This is a new function of BD-Video that plays the primary video and secondary video simultaneously. Blu-ray
7 Product overview Main unit a ( Standby-On ) Turns on the Blu-ray disc player or • switches to standby mode. b Disc co
8 Remote Control a ( Standby-On ) Turns on the Blu-ray disc player or • switches to standby mode.When EasyLink is enabled, switches •
9 p ( Open/Close ) Opens or closes the disc • compartment. q TV CH +/- Selects a TV channel (applicable only • to Philips brand T
Comments to this Manuals