Philips 30PF9946-37 User Manual download pdf (Page 21)

Front connections

Camera or Camcorder

O Connect your camera or camcorder as shown.

e Connect to VIDEO @ and AUDIO L @ for mono

equipment. For stereo equipment also connect AUDIO R (|).

S-VHS quality with an S-VHS camcorder is obtained by

connecting the S-VHS cables with the S-video input © and

audio inputs (D.

Do not connect cable @ and @ at the same time. This may cause

picture distortion !

Headphone

O Insert the plug into the headphone socket as shown.

0 Press on the remote control to switch off the internal

loudspeakers of the TV.

The headphone impedance must be between 8 and 4000 Ohm. The

headphone socket has a 3.5 mm stereo jack.

In the Sound menu select Headphone volume to adjust the

headphone volume.

To select connected devices

0 Press the -Q button repeatedly or select Source in the

Settings menu (see p. 7) to select AVI, AV2, AV3, AV4, FRONT,

DVI or TV channels, according to where you connected your

devices.

0 Press the cursor up/down.

0 Press OK.

Remark: Most equipment (decoder, video recorder) carries out the

switching itself This is however never the case with a computer

connected to the DVI input

If you want to change to TV channels?

Enter the channel number of the TV channel which you want to

watch with the digit buttons.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 89 90

No comments

Philips 30PF9946-37 User Manual Page 21