Philips 30PF9946-37 User Manual download pdf (Page 20)

DVI connector (AV5)

DVI is a specific digital input allowing

encrypted transmission of

uncompressed HD content. DVI

includes HDCP (high-bandwidth

digital content protection), which is

supported by Hollywood, satellite

providers, and most of the consumer

electronics industry. DVI is gaining

monumentum and quickly becoming

an industry standard for the

consumers to view high-definition

material while keeping content

protected.

The DVI IN connector allows

- the following TV and monitor display modes:

EDTV

640/720 X 480p

720 X 576p

HDTV

1920 xIOSOi

VGA 640 X 480

60 Hz

SVGA

800 X 600 56 Hz

XGA

1024 X 768

60 Hz

- uncompressed HD content

- encrypted or non encrypted signals.

Note: Only Single Digital Link DVI is supported.

O Connect the digital DVI output of your HD device (e.g.

PC, DVD player. Set Top Box..) to the DVI IN connector

of your TV.

0 Connect the audio cable @ of your HD device (if

audio is present) to the AUDIO outputs of your HD

device and to the AUDIO R (right) and L (left) inputs of

the panel of the TV.

Notes:

- Proper working is only guaranteed with DVI compliant consumer

products.

- Digital devices from different manufacturers have the possibility

of differing output standards which may cause difficulties for the

television to properly display;

- If the set is cold, there may be a small “flicker” when the set is

turned on. this is normal, there is nothing wrong with the set

- If possible, use the VESA 1024x768@60Hz video mode to

obtain the best image quality for your LCD monitor.

Multi channel Surround receiver

CENTRE IN —

1 1

joj

■ > “"'S®

, AUDIO

----------

-OUT

.... i

■ :■ i

^ 0.

03 ca

0 Connect the audio cable to the multi channel Surround receiver

and to AUDIO OUT L and R below the CENTRE IN connector

of your TV ^.

Note: turn off the TV and your surround receiver before connecting

them. Set the Surround receiver’s volume to minimum.

o If you want the loudspeakers of your monitor to act as center

speaker, also connect an audiocable to the multi channel

Surround receiver and to the CENTRE IN of your TV

0 Select Center input On in the Source menu. See p. 7.

The loudspeakers of the TV will now only produce center

sound, the loudspeakers connected to the audio receiver will

produce Surround Sound.The volume has to be controlled via

the multi channel Surround receiver.

Note: No sound will be heard when a TV channel or external source is

blocked via the Channel Lock menu (see p. 11).

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 89 90

Comments to this Manuals

No comments

Philips 30PF9946-37 User Manual Page 20

Comments to this Manuals

Related products and manuals for Video Philips 30PF9946-37