Philips INCA 320 User Manual download pdf (Page 18)

Page 16 2005-12-12

The format of this file is as follows:

[HOST]

Domain = yyyy

[DEVICES]

RAP_DEVICE_1 = RAP_INCA_320 130.144.84.1

RAP_DEVICE_4 = RAP_INCA_320 130.144.84.3

[AUTHORIZATION]

RAP_DEVICE_ALL = xxxxxxxx

RAP_DEVICE_4 = yyyyyyyy

RAP_DEVICE_5 = zzzzzzzz

Note that all entries are case sensitive.

4.4.1 Host

The host needs to be configured to be in the same domain

as the camera, because the host will only detect the

cameras that are in the same domain as the host is in. The

name of the domain consists of a set of alphanumerical

characters without spaces. The default domain is empty

which results in the default domain. When a domain is

specified the host will only detect the cameras that have

the same domain, it won’t even detect the camera’s in the

empty domain anymore.

Note that this domain has no relation to the term domain

as it is used in Windows and is strictly used as a way to

separate groups of camera’s from each other.

4.4.2 Devices

Sometimes a camera can not be automatically detected by

a host PC, like when the camera is outside of the LAN or

when broadcasting is disabled. In those cases, the

detection of a camera can be forced by specifying the

device ID, the camera type and its IP address. In the given

example there are two camera’s configured. One with the

device ID 1 and one with the device ID 4. These device IDs

need to correspond with the actual device IDs of the

cameras.

Then for each device a camera type is specified, which

should be RAP_INCA_320 followed by the IP address of

that camera.

When all cameras are in the LAN and broadcasting is

enabled, then there is normally no requirement to specify

them manually. If an IP address is configured for a camera

in the RapEthernet.ini file and the camera does not have

that IP address, it is not possible to establish a connection

with that camera.

4.4.3 Authorization

The camera can be protected with a password. In that

case, when a connection is made with a camera from an

application on the host, an authorization error is generated

if the software does not issue the correct password.

When applications such as “Clicks” or the “Display

program” are used a popup screen will be displayed,

making it possible to enter the password. User created

applications will have to be made in such a way that they

handle the error correctly.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments

Philips INCA 320 User Manual Page 18

Comments to this Manuals

Related products and manuals for Video surveillance systems Philips INCA 320