Philips FC9310/02 User Manual download pdf (Page 13)



1 Presstheltercoverreleasebuttontoopentheltercover.

2 Removetheltercover.

3 TakeoutthelterandplaceanewHEPA13lterintheappliance.

4 Fitthetwolugsoftheltercoverbehindtheridgeatthebottom

ofthevacuumcleaner(1).Thenpushtheltercovertowardsthe

appliance(2).

5 Presshometheltercovertolockit(‘click’).

Note: Make sure the lter is properly closed.

Tip: For optimal results, replace the HEPA 13 lter every 2 years. If you want

to minimise the impact on the environment, you can wash the HEPA 13 lter.



To wash the HEPA 13 lter, follow the instructions below.

1 RinsetheHEPA13lterunderahotslow-runningtap.

Nevercleanthelterwithabrush.

2 Carefullyshakethewaterfromthesurfaceofthelter.Letthelter

dry completely for at least 2 hours before you put it back into the

vacuum cleaner.

Note: Cleaning does not restore the original colour of the lter, but does restore

its ltration power.

ENGLISH 13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 165 166

No comments

Philips FC9310/02 User Manual Page 13