Philips SCE4420/10 User Manual download pdf (Page 4)

ENGLISH

4 Functional overview (fig. A)

Power indicator

Indicates the battery status.

Battery check button

Activates the power indicator.

RESET

Resets the power pack to the factory default settings.

INPUT 5V DC (mini USB)

Connects to the mains supply.

USB port

Connects to 5V DC devices (mobile telephones,

MP3 players, etc.).

5 Operation

Charging the power pack (fig. B)

Press the battery check button (2).

> One, two or three LEDs light up in the power

indicator (1), indicating the current battery status.

If all four LEDs light up, the battery is fully charged.

Connect the mini USB connector tip to the retractable

cable.

Connect the mini USB connector tip to the

rechargeable power pack.

Connect the retractable cable to the USB port of your

PC/notebook.

> The power indicator LEDs (1) will flash one after

another, indicating that the battery is being charged.

> When all LEDs light continuously the battery is fully

charged.

Disconnect the USB cable from the USB port of your

PC/notebook and disconnect the other end of the

USB cable from the power pack.

Note:

You can also charge the power pack via an universal

USB charger (sold separately; we recommend the

Philips universal USB charger SCM2280). Connect one

side of the USB cable to the power pack (5V DC mini

USB) and connect the other side of the retractable

USB cable to the universal USB charger.

Charging devices - preparation

Check the maximum input voltage (V DC) of the

device you wish to connect. For this see the user

manual that came with the device.

Make sure the device does not consume more current

(mA) than 350 mA.

Check what connector tip is required for your device.

See the compatibility sheet for the proper tip for your

device.

Charging 5V devices (fig. C)

Insert the plug of the USB cable into the USB port (5).

Connect the connector tip to the USB cable.

Insert the connector tip into the power supply jack of

the device.

> The device will now derive it’s power from the

power pack.

> If the device has a charging indicator, it will indicate

that the device is being charged.

Note:

If you are unable to solve a problem by following the

above hints, try resetting the power pack by pressing

RESET.The RESET button is recessed to prevent

accidental reset of the power pack. Use a paperclip to

gently press the RESET button (see fig. D).

Tip:

For several portable devices (5V), a USB connection

cable is supplied with the original device (e.g. most

MP3 players). In this case, you can also use this cable

to charge your device.

SCE4420 17-09-2007 13:27 Pagina 4

1 2 3 4 5 6 7 8 9 ... 60 61

Comments to this Manuals

No comments

Philips SCE4420/10 User Manual Page 4

Comments to this Manuals

Related products and manuals for Unknown Philips SCE4420/10