Philips FC8810/01 User Manual download pdf (Page 18)

2 Place the dry wipe on a table and place the dry wipe attachment on the

wipe with its fixation lugs pointing towards you.

3 Fold both ends of the dry wipe around the dry wipe

attachment and

fasten the dry wipe onto the attachment by pushing the fixation blocks

into the recesses.

4 Insert the fixation lug of the dry wipe attachment into the opening just

behind the wheel on one side of the robot and push until you hear it lock

into place with a click. Then repeat these actions on the other side.

5 Turn the robot and place it on the floor on its wheels with the dry wipe

attachment touching the floor.

Using the robot with the dry wipe attachment

When the dry wipe attachment is attached, you can use the robot in any

mode and on all hard floors. Do not use the dry wipe attachment on carpet

or rugs.

Removing the dry wipe attachment

1 Remove the dry wipe attachment as soon as you have finished wiping

the floor.

2 Turn the robot upside down and place it on the floor or on a table.

3 Push one end of the dry wipe attachment towards the wheel on the

other side of the robot to release it. Then pull the attachment off the

robot.

Using the pointer (FC8820)

Charging the pointer

The pointer has a rechargeable battery that can be charged with the USB

cable supplied.

1 Insert the micro-USB plug into the socket in the bottom of the pointer.

English

Preparing the dry wipe attachment for use

1 Turn the robot upside down and place it on the floor or on a table.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 189 190

No comments

Philips FC8810/01 User Manual Page 18