Philips FC8810/01 User Manual download pdf (Page 11)

Preparing for use

Installing the docking station

1 Insert the small plug of the adapter into the socket on the docking station

(1) and insert the adapter into the wall socket (2).

The display of the docking station comes on.

2 Place the docking station on a horizontal, level floor against the wall.

100 cm

30 cm

80 c

Note: Make sure that there are no obstacles or height differences 80 cm

in front, 30 cm to the right and 100 cm to the left of the docking station.

Tip: To ensure the docking station stays firmly in the selected spot, fasten

it to the wall with screws or with two strips of double-sided tape.

Charging

When charging for the first time and when the rechargeable battery of the

robot is empty, the charging time is four hours.

Your robot can be charged in two ways:

On the docking station, either manually or automatically during use;

By connecting the robot directly to the mains.

Note: When the rechargeable battery is fully charged, your robot can clean

for up to 120 minutes

Charging on the docking station

1 Press the power switch to switch on the robot.

English

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 189 190

No comments

Philips FC8810/01 User Manual Page 11