Philips 328P6VUBREB/00 User Manual download pdf (Page 4)

2

1. Important

brightness, avoid the uorescent

lighting, and surfaces that don’t

reect too much light.

• Seeing a doctor if your symp-

toms.

• Maintenance

• To protect your display from

possible damage, do not put

excessive pressure on the LCD

panel. When moving your display,

grasp the frame to lift; do not lift

the display by placing your hand or

fingers on the LCD panel.

• Unplug the display if you are not

going to use it for an extensive

period of time.

• Unplug the display if you need to

clean it with a slightly damp cloth.

The screen may be wiped with a

dry cloth when the power is off.

However, never use organic solvent,

such as, alcohol, or ammonia-based

liquids to clean your display.

• To avoid the risk of shock or

permanent damage to the set, do

not expose the display to dust,

rain, water, or excessive moisture

environment.

• If your display gets wet, wipe it with

dry cloth as soon as possible.

• If foreign substance or water gets in

your display, please turn the power

off immediately and disconnect

the power cord. Then, remove the

foreign substance or water, and

send it to the maintenance center.

• Do not store or use the display in

locations exposed to heat, direct

sunlight or extreme cold.

• In order to maintain the best

performance of your display and use

it for a longer lifetime, please use

the display in a location that falls

within the following temperature

and humidity ranges.

• Temperature: 0-40°C 32-104°F

• Humidity: 20-80% RH

Important information for Burn-in/

Ghost image

• Always activate a moving screen

saver program when you leave

your display unattended. Always

activate a periodic screen refresh

application if your display will

display unchanging static content.

Uninterrupted display of still or

static images over an extended

period may cause “burn in”, also

known as “after-imaging” or “ghost

imaging”, on your screen.

• “Burn-in”, “after-imaging”, or

“ghost imaging” is a well-known

phenomenon in LCD panel

technology. In most cases, the

“burned in” or “after-imaging” or

“ghost imaging” will disappear

gradually over a period of time after

the power has been switched off.

Warning

Failure to activate a screen saver, or

a periodic screen refresh application

may result in severe “burn-in” or “after-

image” or “ghost image” symptoms

that will not disappear and cannot be

repaired. The damage mentioned above

is not covered under your warranty.

Service

• The casing cover should be opened

only by qualified service personnel.

• If there is any need for any

document for repair or integration,

please contact with your local

service center. (please refer to the

chapter of “Consumer Information

Center”)

• For transportation information,

please refer to “Technical

Specifications”.

1 2 3 4 5 6 7 8 9 ... 32 33

Comments to this Manuals

No comments