Philips AVENT SCH540 User Manual download pdf (Page 15)



1 Align the blocks of the measurement unit with the matching slots

in the back of the shield.

2 Insert the measurement unit into the shield. Make sure that the tip

of the probe goes into the pocket inside the teat. (Fig. 3)

3 Turn the measurement unit 90° clockwise to lock it into position.



Do not sterilise or boil the thermometer.

Do not clean the exible-tip thermometer in the dishwasher, in the

microwave or in a microwave steriliser.

1 Clean the exible-tip thermometer with a soft damp cloth.



Before rst use, wash and rinse the soother thoroughly.

Clean the soother before each use.

1 Sterilise or boil the soother.

The soother and protection cap are suitable for all forms of sterilisation.

Sterilise using a Philips AVENT Steam Steriliser or boil in water for 5

minutes.

If you use a sterilising solution, follow the instructions on the package. Do

not leave the soother in the sterilising solution for longer than

recommended, as this may weaken the teat.

Wash your hands thoroughly and ensure surfaces are clean before

contact with sterilised components.

2 After sterilisation, let the soother cool down for 5 minutes

and squeeze out any trapped water from the teat. This is to

ensure hygiene.



Do not sterilise the storage box.

 15

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 113 114

No comments

Philips AVENT SCH540 User Manual Page 15