Philips Colour Observation Camera User Manual

4Page Introduction... 4Connection and oper

51 Focus adjustment ring2 Back-focus adjustment ring3 Camera sound on/off4 Auto-iris socket5 Cable length compensation selector6 System cable so

6Installation1. Take the camera, system cable and monitor to the area you want to observe (with the monitor on site, youcan check whether the camera

77. Check on the monitor whether the camera covers the required area (The bestresults are obtained when the camera is pointed slightly downwards and

8Focus adjustment• Adjust the focus ring of the camera lens to obtain optimal image sharpness.Remark: If still no sharp object image is obtained, you

9The CS-mount of the camera allows you to use other lenses. The field of view (= covered area) ofan 8mm lens is half of the field of view of the 4mm l

10For the interconnections between thesystem monitor and camera 25m/75ftsystem cable is supplied.For an optimum picture and sound qualityyou should al

88Pick-up element 1/3" solid state CCDPixel elements 5 12 (H) x 582 (V), PAL interlaced, or 512(H) x 492 (V), NTSCinterlacedResolution 330 TVLGa