Philips FC8822/01 User Manual download pdf (Page 17)

Using the dry wipe attachment

The dry wipe attachment is a feature that allows you to clean hard floors

with dry wipes.

Note: If you use the dry wipe attachment, the robot may have trouble

crossing thresholds or climbing onto rugs.

Preparing the dry wipe attachment for use

1 Turn the robot upside down and place it on the floor or on a table.

2 Place the dry wipe on a table and place the dry wipe attachment on the

wipe with its fixation lugs pointing towards you.

3 Fold both ends of the dry wipe around the dry wipe attachment and

fasten the dry wipe onto the attachment by pushing the fixation blocks

into the recesses.

4 Insert the fixation lug of the dry wipe attachment into the opening just

behind the wheel on one side of the robot and push until you hear it lock

into place with a click. Then repeat these actions on the other side.

5 Turn the robot and place it on the floor on its wheels with the dry wipe

attachment touching the floor.

Using the robot with the dry wipe attachment

When the dry wipe attachment is attached, you can use the robot in any

mode and on all hard floors. Do not use the dry wipe attachment on carpet

or rugs.

Removing

the dry wipe attachment

1 Remove the dry wipe attachment as soon as you have finished wiping

the floor.

2 Turn the robot upside down and place it on the floor or on a table.

English

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 121 122

No comments

Philips FC8822/01 User Manual Page 17