Philips 27I COLOR TV W-REMOTE CONTROL-STEREO 27PS50B - User's Guide download pdf (Page 25)

RE-ASSIGNING DEVICE KEYS

The Cox Universal Remote Control can be set up to con-

trol a second TV or VCR, or any combination of up to

four home entertainment devices. For example, to have

the unit control a TV, a Cable Converter, and two VCRs,

you will need to re-assign the unused AUX key to oper-

ate the second VCR as follows:

1. On the remote control,press VCR once.

Then press and hold SETUP until the VCR key

blinks twice, then release SETUP.

2. Enter 9 - 9 - 2.The VCR key will blink twice.

3. Press VCR once, then press AUX once. The

VCR key will blink twice.

4. The AUX key is now ready to be programmed

for your second VCR. See Programming Device

Control on page 8.

To re-assign other device keys, repeat steps 1 to 4 and

substitute the key sequence using the following chart:

To Re-Assign Perform Key Sequence

TV as 2nd VCR key: SETUP - 9 - 9 - 2 - VCR - TV

TV as 2nd Auxiliary key: SETUP - 9 - 9 - 2 - AUX - TV

TV as 2nd Cable key: SETUP - 9 - 9 - 2 - CABLE - TV

TV back to TV: SETUP - 9 - 9 - 2 - TV - TV

VCR as 2nd TV key: SETUP - 9 - 9 - 2 - TV - VCR

VCR as 2nd Auxiliary key: SETUP - 9 - 9 - 2 - AUX - VCR

VCR as 2nd Cable key: SETUP - 9 - 9 - 2 - CABLE - VCR

VCR back to VCR: SETUP - 9 - 9 - 2 - VCR - VCR

AUX as 2nd TV key: SETUP - 9 - 9 - 2 - TV - AUX

AUX as 2nd VCR key: SETUP - 9 - 9 - 2 - VCR - AUX

AUX

as 2nd Cable key:

SETUP - 9 - 9 - 2 - CABLE - AUX

AUX

back to

AUX

SETUP - 9 - 9 - 2 - AUX - AUX

Upon completion of a re-assignment, the selected mode

key will blink twice to confirm your selection. Then, you’ll

need to program device control (see Programming Device

Control on page 8).

Cox Manual 11/27/01 7:14 PM Page 25

1 2 ... 20 21 22 23 24 25 26 27 28

No comments

Philips 27I COLOR TV W-REMOTE CONTROL-STEREO 27PS50B - User's Guide Page 25