Philips 27I COLOR TV W-REMOTE CONTROL-STEREO 27PS50B - User's Guide download pdf (Page 21)

CHECKING THE CODES

If you have set up the Cox Universal Remote Control

using the Searching For Your Code procedure (on the

previous page),you may need to find out which four-digit

code is operating your equipment. For example, to find

out which code is operating your TV:

1. Turn on your TV.

2. On the remote control, press TV once.

Then press and hold SETUP until the

TV key blinks twice, then release SETUP.

3. Enter 9 - 9 - 0.The TV key will blink twice.

4. To view the code for the first digit, press 1 once.

Wait 3 seconds and count the number of times

the TV key blinks (e.g., 3 blinks = 3) and write

down the number in the leftmost TV Code box

(see below).

NOTE: If a code digit is “0”, the selected mode key will

not blink.

5. Repeat step 4 three more times for remaining

digits. Use 2 for the second digit, 3 for the third

digit, and 4 for the fourth digit. Finish writing

down the code in the TV Code boxes below.

6. To check for other device codes, repeat steps 1

through 5, but substitute the appropriate key

(i.e., AUX, VCR,or CABLE) for the (Auxiliary,

VCR, or Cable) device you are checking.Write

down the codes in the appropriate boxes below.

AUX Code

Aux Device ____________________

VCR Code

TV Code

CABLE Code

Cox Manual 11/27/01 7:14 PM Page 21

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

No comments

Philips 27I COLOR TV W-REMOTE CONTROL-STEREO 27PS50B - User's Guide Page 21