Philips REM400 User Manual download pdf (Page 9)

Deleting Functions From The L Keys:

1. On the DSS remote control,press

and hold SET until the red light

blinks twice,then release SET.

2. Enter 9 - 7 - 6.

3. Press the component

key once where the

learned feature to be

deleted is stored (e.g.,TV).

4. Press the L key to be deleted

twice. The red light will blink

twice after the second press.

5. To clear additional functions

stored on the L keys,repeat steps

1 through 4 .

SCAN Key

The SCAN key allows the remote control to

scan the TV, VCR, CBL and DSS channels.

When activated, the remote control will

change channels every 3 seconds.

1. On the remote con-

trol, press TV, VCR,

CBL,or DSS once.

2. Press SCAN once. Scanning will

start with the current channel,

then proceed to the next channel

up, and continue until all chan-

nels of your TV,VCR,CBL or DSS

component are scanned.

3. To stop scanning channels,press

SCAN.

MCP Key

The DSS remote control includes a multi-

component power (MCP) key that can be

programmed for master power on/off con-

trol of components using a single key.

To program the MCP key:

1. On the remote control, press and

hold SET until the red light blinks

twice,then release SET.

2. Enter 9-9-5.The red light will

blink twice.

3. Press MCP once.

4. Press a Component

key once (e.g., TV,

VCR, CBL, AUD, DSS,

or CD).

5. Press POWER.

6. Repeat steps 4 and 5 for each

component you want under

master power on/off control.

7. Press and hold SET until the red

light blinks twice, then release

SET.

To Clear The MCP Key:

1. On the remote control,press and

hold SET until the red light

blinks twice, then release SET.

2. Enter 9-9-5.The red light will

blink twice.

3. Press MCP once.

4. Press and hold SET until the red

light blinks twice, then release

SET.

FC1 And FC2 Keys

The FC1 and FC2 keys can be setup to per-

form a number of functions with a single

key press once the selection is programmed.

Repetitive, time-consuming operations can

be grouped for easy, convenient access

through the press of one key.

The FC keys are ideal for home theater oper-

ations, setting a favorite channel, adding to

multiple component uses, guide steps or

other multiple functions you would like to

control with one key press. On one key, you

can define and program a sequence of events.

Moreover, each FC key can hold up to 15 key

presses, allowing optimal individual cus-

tomization. Below are a few examples to get

you started.

Programming A Favorite Channel

With so many channels available through

your cable system or satellite provider, a

favorite channel can be programmed for easy,

direct channel selection with one key press.

For example, let’s assume your favorite pro-

grams are on channel 71. Use the following

instructions to program the FC1 or FC2 key

for this channel:

continued on next page...

9

OPERATING YOUR REMOTE CONTROL (continued)

REM400 Manual Engl 12/28/99 12:01 PM Page 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 18 19

Comments to this Manuals

No comments