Philips FC6146/01 User Manual download pdf (Page 8)





1 Attach the charger to the wall as shown in the gure. (Fig. 2)

If you attach the charger to the wall, the space between the screw holes

has to be 12cm.

2 You can also place the charger on a horizontal surface (e.g. a table

or desk) (Fig. 3).

3 Wind excess mains cord around the reel in the back of the charger

and pass the cord through the slot (Fig. 4).



Charge the appliance for at least 16 hours before you use it for the rst

time.

Tip: If you are not going to use the appliance for a longer period of

time, remove the adapter from the wall socket to save energy.

1 Make sure the appliance is switched off.

2 Put the adapter in the wall socket.

3 Place the vacuum cleaner on the charger (Fig. 5).

- Make sure you place the opening in the back of the vacuum cleaner

on the hook of the charger (Fig. 6).

, The charging light ashes to indicate that the appliance

is charging (Fig. 7).

, The charging light is on continuously to indicate that the appliance

is fully charged.



1 Push the on/off slide forwards to switch on the appliance (Fig. 8).

- If you want to use normal power, select speed 1.

- If you want to use high power, select speed 2.

2 Push the on/off slide backwards to switch off the appliance (Fig. 9).

8

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 155 156

No comments

Philips FC6146/01 User Manual Page 8