Philips HF8430 Intimate massager User Manual Page 8

  • Download
  • Add to my manuals
  • Print
  • Page
    / 68
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 7
Note: The appliance may produce a smell the rst few times you charge it. This is normal.
, Whenthebatteryisfullycharged,thelightringgoesout.
Candlelight set
Charge the candlelight set for 12 hours.
When the candles are fully charged, they have an operating time of approx. 24 hours.
1 Insert the small plug into the charger and put the adapter in the wall socket.
, The charging light on the charger goes on (Fig. 3).
2 Put one or more candles on the charger (Fig. 4).
, Whenthecandlesarefullycharged,thecharginglightonthechargergoesoutandthe
charging process stops.
Note: The candles may go on when you put them on the charger. If they do, remove the candles from the
charger and tilt them to switch them off. Then put the candles back onto the charger.
Note: For safety reasons, a built-in timer stops the charging process after 12 hours, when the batteries
are fully charged. If you have one or more uncharged candles left and want to charge them right away,
press the button on the charger to start another charging cycle. When you do this, the charging light goes
on again.
Preparing for use
Massager
Cleaning
Thoroughlycleanthemassagerbeforerstuse,aftereveryuseandwhenyouuseitonanother
bodyarea,toreducetheriskofinfection(seechapter‘Cleaning’).
Pre-warming the massager
The charger has a pre-warming button that you can use to pre-warm the bottom of the massager
to a comfortable temperature (approx. 40°C).
Never warm the massager in an oven or microwave.
1 Placethemassageronthecharger.Itonlytsproperlyonthechargerwiththebuttonsfacing
up.
2 Press the pre-warming button (Fig. 5).
, Thepre-warminglightringstartsashingtoindicatethatthemassageriswarmingup.
, Afterapprox.5minutes,thepre-warminglightringstopsashingandlightsupcontinuously
toindicatethatthemassagerhasreachedacomfortabletemperature.
, After30minutes,thepre-warmingfunctionautomaticallyswitchesoff,butyoucanalso
switchitoffbypressingthepre-warmingbuttonagain.
Using the appliance
Massager
1 Press any button to switch on the massager (Fig. 6).
, The light ring goes on.
, Themassagerstartsoperatinginthedefaultmode(mode1)andatmoderatevibration
speed.
Tip: We advise you to start in the default mode. You can gradually increase the vibration speed once you
are familiar with the options.
Note: If you feel uncomfortable during use, you can adjust the vibration speed. See step 3.
ENGLISH8
Page view 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 67 68

Comments to this Manuals

No comments