Philips 40PFL4907 User Manual download pdf (Page 41)

English

Wirelessnetworksetting

This menu is displayed only when you set Wireless in

Networkselection. In order to use a wireless network, you must set up

a connection to the AP (e.g. wireless router).

3 Use ▲▼ to select Wirelessnetworksetting, then press OK.

Auto

Search for wireless networks automatically and select the SSID from the

list.

4 Use ▲▼ to select Auto, then press OK.

5 The list of wireless networks will be displayed.

Use ▲▼ to select the appropriate the SSID, then press OK.

Auto Router 1

Enter Key

Manually enter your S

Router 2

Select

Router 3

Enter Key

Router 4

Select

• If you select the SSID with , WEP*

/ WPA / WPA2 Key entry

screen will appear.

Enter the WEP*

/ WPA / WPA2 key of the selected wireless

network using ▲▼◄►, then press OK.

• If you select the SSID has a WPS, the WPS setting screen will

appear.

Use ▲▼◄► to select a setting, then press OK.

Easyconnect

Select this setting if your router has a WPS

button. Start scanning for wireless networks on

the TV after pressing the WPS button on your

router. If connection test fails, try Easy connect

again.*

If it fails then refer to the router’s manual for

more details.

WPScode

Select this setting if your router has a WPS but

does not have a WPS button. Enter the 8-digit

WPS PIN code shown on your TV in the router

settings menu via PC before Connect is selected.

Manual

If your wireless network with authentication

setting (WEP*

, WPA-PSK or WPA2-PSK),

WEP*

/ WPA / WPA2 Key entry screen will

appear. Enter the WEP*

/ WPA / WPA2 key of

the selected wireless network using ▲▼◄►,

then press OK.

*1 WPS (Easy Connect) cannot be used when the security protocol is set to

WEP. Change the Access Point’s security mode from WEP to WPA or WPA2

(recommended).

*2 WEP is not recommended to be used due to its Major security aws.

Change the Security protocol on the wireless router to WPA or WPA2

(recommended) mode.

Conrmation message will appear. Select OK to complete the settings.

Note

• For a wireless network with authentication setting, key icon appears to the right hand

of the SSID.

• Signal icon shows the strength of the signal.

• WEP / WPA key appears as asterisks on the conrmation screen.

• The wireless LAN supports following specications.

– Wireless standards : IEEE 802.11 b/g/n

– Frequency spectrum : 2.4GHz

– Security protocol : WEP*

/ WPA / WPA2

ManuallyenteryourSSID

Set up the connection to the AP (e.g. wireless router) manually by

entering the SSID.

4 Use ▲▼ to select ManuallyenteryourSSID, then press OK.

• AP (e.g. wireless router) SSID entry screen will appear.

Enter the SSID using ▲▼◄►, then press OK.

5 Use ▲▼ to select the authentication setting of the selected

wireless network.

• For a wireless network with authentication setting, select the

authentication setting, according to the security type of the

wireless network.

Selectsecuritytypefor

"Router1"

None

WEP

WPA-PSK

WPA2-PSK

Back

None

Set the authentication setting to None.

WEP*

Set the authentication setting to WEP.*

WPA-PSK

Set the authentication setting to WPA-PSK.

WPA2-PSK

Set the authentication setting to WPA2-PSK.

• For a wireless network without authentication setting, select

None.

• If you selectWEP*

, WPA-PSK or WPA2-PSK, WEP /

WPA / WPA2 Key entry screen will appear.

Enter the WEP*

/ WPA / WPA2 key of the selected wireless

network using ▲▼◄►, then press OK.

• Conrmation message will appear. Select Yes to complete the

settings.

2 WEP is not recommended to be used due to its Major security aws.

Change the Security protocol on the wireless router to WPA or WPA2

(recommended) mode.

Continued on next page.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 66 67

Comments to this Manuals

No comments

Philips 40PFL4907 User Manual Page 41

Comments to this Manuals

Related products and manuals for LED TVs Philips 40PFL4907