Philips 49PUS6262/12 User Manual download pdf (Page 19)

Satellite

Search for Satellite and Satellite Settings

Search for Satellite Channel

 (Home) > Settings > Satellite

installlation > Search for satellite

Update existing channel list

 (Home) > Settings > Satellite

installlation > Search for satellite > Update

channels

Re-install all channels

 (Home) > Settings > Satellite

installlation > Search for satellite > Reinstall

channels

• Select the group of channels you want to install.

• Satellite operators can offer channel packages that

bundle free channels (free-to-air) and offer a sorting

that suits a country. Some satellites offer subscription

packages - a collection of channels you pay for.

Satellite Settings

 (Home) > Settings > Satellite

installlation > Search for satellite > Reinstall

channels

1 - Select From a sorted package or All channels

unsorted.

2 - Select Settings and press OK.

3 - Press  Reset to reset, or

press  Done when complete the settings.

Connection type

Select the number of satellites you want to install.

The TV sets the appropriate connection type

automatically.

• Up to 4 Satellites - You can install up to 4 satellites

(4 LNBs) on this TV. Select the exact number of

satellites you wish to install at the start of the

installation. This will speed up the installation.

• Unicable - You can use a Unicable system to

connect the antenna dish to the TV. You can select

Unicable for 1 or for 2 satellites at the start of the

installation.

LNB settings

In some countries, you can adjust the expert settings

for homing transponder and each LNB. Only use or

change these settings when a normal installation fails.

If you have non-standard satellite equipment, you

can use these settings to overrule the standard

settings. Some providers might give you some

transponder or LNB valeus which you can enter here.

• LNB Power - By default, LNB Power is set to On.

• 22 kHz Tone - By default, the Tone is set to Auto.

• Low LO Frequency / High LO Frequency - The local

oscillator frequencies are set to standard values.

Adjust the values only in case of exceptional

equipment that needs different values.

Add Satellite or Remove Satellite

 (Home) > Settings > Satellite

installlation > Search for satellite > Add satellite,

Remove satellite

 (Home) > Settings > Satellite

installlation > Search for satellite > Add satellite

• You can add an additional satellite to your current

satellite installation. The installed satellites and their

channels remain untouched. Some satellite operators

do not allow adding a satellite.

• The additional satellite should be seen as an extra, it

is not your main satellite subscription or not the main

satellite of which you use its channel package.

Typically, you would add a 4th satellite when you

have 3 satellites already installed. If you have 4

satellites installed, you might consider removing one

first to be able to add a new satellite.

• If you currently have only 1 or 2 satellites installed,

the current installation settings might not allow

adding an extra satellite. If you need to change the

installation settings, you must redo the complete

satellite installation. You cannot use Add satellite if

a change of settings is needed.

 (Home) > Settings > Satellite

installlation > Search for satellite > Remove

satellite

You can remove one or more satellites from your

current satellite installation. You remove the satellite

and its channels. Some satellite operators do not

allow removing a satellite.

Automatically Search for Channels

 (Home) > Settings > Satellite

installlation > Automatic channel update

If you receive digital channels, you can set the TV to

automatically update the list with new channels.

Alternatively, you can start a channel update yourself.

Automatic channel update

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 65 66

Comments to this Manuals

No comments

Philips 49PUS6262/12 User Manual Page 19

Comments to this Manuals

Related products and manuals for LCD TVs Philips 49PUS6262/12