Philips 40PFL5706 User Manual download pdf (Page 12)

English

You must set

[

Home

]

. Otherwise, personalized picture and sound

settings will not be memorized after the unit goes to standby mode.

• Select

[

Retail store

]

, the unit will be set up with predeﬁ ned setting

for retail displays. In this setting, the power consumption may

possibly exceed the limited requirement of the ENERGY STAR

qualiﬁ cation.

• Select

[

Home

]

, the unit will be set to maximize energy efﬁ ciency.

Picture and sound settings can be adjusted and saved as per your

personal preferences.

Press

to select

[

Start

]

, then press OK to begin

[

Settings assistant

]

Settings assistant will allow you to customize your picture settings to

your personal preference. You will see a series of test pictures where

the right side and left side differ. Select the side that is most pleasing to

you with the Left/Right buttons.

Cancel

Start

Select

[

Picture A

]

[

Picture B

]

by pressing

that is the most

pleasing to you, then press OK. You see 5 different pictures to be

completed.

Cancel

Picture A

Picture B

Which side of the picture do you prefer?

Press

to select

[

Store

]

, then press OK.

Cancel

Store

Store your preferences.

Press OK to ﬁ nish

[

Settings assistant

]

Exit

The TV has learned your preferences.

Press

to select

[

Finish

]

, then press OK.

Finish the Setup.

Note

• If you are not receiving a signal from your cable service, contact the CATV provider.

• If you press

during autoprogram, an installation will be canceled except the language

selection.

• The initial autoprogram function can be executed for either

[

Antenna

]

[

Cable

]

only once. When you change the connection (Antenna / Cable), set autoprogram again.

(Refer to page 34.)

Switching on and initial setup

Before you switch on the TV, check that the AC power cord is properly

connected. Press

POWER at the right side of the TV, or press

(

standby-On

)

on the remote control. The TV normally takes 25-30

seconds to start up and the following screen appears the ﬁ rst time you

turn on the TV.

After you read a welcome screen, follow the on-screen instructions

to select your language and complete your TV setup. Installation takes

approximately 20 minutes.

Select your menu

language with the

Up/Down buttons on

your remote control,

press the OK button to

proceed.

●

English

Français

Español

●

Network setup screen will appear. Use

to select

[

]

[

Wireless

] / [

Wired

]

, then press OK.

• If you select

[

Wireless

]

, use

to select a setting and then press

OK.

Setting items Description

Easy connect

Select this setting if your router has a Wi-Fi

Protected Setup (WPS) button. Start scanning

for wireless networks on the TV after pressing

the WPS button on your router. If connection

test fails, refer to the router's manual for more

details.

Scan

Search for wireless networks automatically

and select the wireless network name (SSID)

from the list. see ‘Wireless network setting

(Auto)’on page 30.

• If you select

[

Wired

]

, use

to select a setting and then press

OK.

Connection test will start automatically. (See ‘Connection test’ on page 29.)

Press

to select the desired mode for energy saving, then press OK.

Retail store

Home

"Home" is recommended for

normal home use.In the Retail

Store mode all settings are

fixed.

Select

[

Retail store

]

if you want backlight to be brighter.

Select

[

Home

]

to reduce power consumption.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 52 53

Comments to this Manuals

No comments

Philips 40PFL5706 User Manual Page 12

Comments to this Manuals

Related products and manuals for LCD TVs Philips 40PFL5706