Philips HR1823 User Manual download pdf (Page 9)

the worldwide guarantee leaet). If there is no Consumer Care Centre in your country, go to your

local Philips dealer or the nearest Philips Service Centre.

Problem Solution

The appliance does not

work.

The appliance is equipped with a safety system. It does not work if the

parts have not been mounted properly. Check whether the parts have

been attached in the right way, but switch off the appliance before you

do so.

The motor unit gives off

an unpleasant smell the

rst few times the

appliance is used.

This is not unusual. If the appliance continues to give off this smell after

a few times, check the quantities you are processing and the

processing time. After the appliance has been running for 2 minutes,

switch it off and let it cool down for 2 minutes.

The appliance makes a

lot of noise, smells, is too

hot to touch, smokes etc.

Switch off the appliance and unplug it. Go to the nearest Philips

service centre or your dealer for assistance.

The sieve is blocked. Switch off the appliance, clean the feed tube and process a smaller

quantity.

The sieve touches the

feed tube or vibrates

strongly during

processing.

Switch off the appliance and unplug it. Check if the sieve has been

properly placed into the pulp collector. The ribs in the bottom of the

sieve should t properly onto the driving shaft. Check if the sieve is

damaged. Cracks, crazes, a loose grating disc or any other irregularity

may cause malfunction.

ENGLISH 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 75 76

Comments to this Manuals

No comments