Philips HTS3541 Specifications download pdf (Page 13)

11

English

EN

Caution

• Familiarize yourself with the network router

and networking principles. If necessary, read

documentation that accompanies the network

components. Philips is not responsible for lost,

damaged, or corrupt data.

Before you start

• For Netﬂ ix, VUDU and software update, make

sure that the network router has access to the

Internet with high-speed connection, and is not

restricted by ﬁ rewalls or other security systems.

• Make the necessary connections described in

the quick start guide, and then switch the TV

to the correct source for your home theater.

Set up the wired network

What you need

• A network cable (RJ45 straight cable).

• A network router (with DHCP enabled).

1 Using a network cable, connect the LAN

connector on your home theater to the

network router.

2 Press ( Home ).

3 Select [Setup] , and then press OK .

4 Select [Network] > [Network Installation]

> [Wired (Ethernet)] .

5 Follow the onscreen instructions to complete

the setup.

• If connection fails, select [Retry] , and

then press OK .

6 Select [Finish] , and then press OK to exit.

• To view the network settings, select [Setup]

> [Network] > [View Network Settings] .

LAN

www

Set up the wireless network

Your home theater has built-in Wi-Fi for easy

access to the wireless network.

What you need

• A network router (with DHCP enabled). For

best wireless performance, coverage, and

compatibility, use 802.11n router.

1 Press ( Home ).

2 Select [Setup] , and then press OK .

3 Select [Network] > [Network Installation]

> [Wireless (Wi-Fi)] , and then press OK .

4 Follow the onscreen instructions to select

and set up the wireless network.

• If connection fails, select [Retry] , and

then press OK .

5 Select [Finish] , and then press OK to exit.

• To view the network settings, select

[Setup] > [Network] > [View Wireless

Settings] .

www

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

Comments to this Manuals

No comments