Philips FWM4500X User Manual Page 24

  • Download
  • Add to my manuals
  • Print
  • Page
    / 25
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 23
12 Troubleshooting
Warning
Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requestingservice.Iftheproblemremains
unsolved, go to the Philips web site (www.
philips.com/welcome). When you contact
Philips, ensure that the apparatus is nearby
and the model number and serial number are
available.
No power
Ensure that the AC power plug of the unit
is connected properly.
Ensure that there is power at the AC
outlet.
To save power, the unit switches to
standby automatically 15 minutes after
a play reaches the end and no control is
operated.
No sound or poor sound
Adjust the volume.
Check that the speakers are connected
correctly.
Check if the stripped speaker wires are
clamped.
Left and right sound outputs reversed
Check the speaker connections and
location.
No response from the unit
Disconnect and reconnect the AC power
plug, then turn on the unit again.
Remote control does not work
Beforeyoupressanyfunctionbutton,rst
select the correct source with the remote
control instead of the main unit.
Reduce the distance between the remote
control and the unit.
Insert the batteries with their polarities
(+/– signs) aligned as indicated.
Replace the batteries.
Aim the remote control directly at the
sensor on the front of the main unit.
No disc detected
Insert a disc.
Check if the disc is inserted upside down.
Wait until the moisture condensation at
the lens has cleared.
Replace or clean the disc.
UseanalizedCDorcorrectformatdisc.
Cannot display some les in USB device
ThenumberoffoldersorlesintheUSB
device has exceeded a certain limit. This
phenomenon is not a malfunction.
Theformatsoftheselesarenot
supported.
USB device not supported
The USB device is incompatible with the
unit. Try another one.
Poor radio reception
Increase the distance between the unit and
your TV or VCR.
If the signal is too weak, adjust the antenna
or connect an external antenna for better
reception.
Clock/timer setting erased
Power has been interrupted or the power
cord has been disconnected.
Reset the clock/timer.
Timer does not work
Set the clock correctly.
Switch on the timer.
Page view 23
1 2 ... 19 20 21 22 23 24 25

Comments to this Manuals

No comments