19EN
10 Other features
Set the alarm timer
This music system can be used as an alarm
clock. You can select disc, radio or USB as alarm
source.
Note
•
If you have set a record timer and an alarm timer, only
the latest timer shall be activated.
1 Ensure that you have set the clock
correctly.
2 Press to switch to standby mode.
3 Press and hold SLEEP/TIMER for more
than 2 seconds.
» A prompt to select the source is
displayed.
4 Press CD 1/2/3, or TUNER or USB to
select a source.
5 Press SLEEP/TIMERtoconrm.
» The clock digits are displayed and
begin to blink.
6 Press ALB/PRESET+/- to set the hour.
7 Press / to set the minute.
8 Press SLEEP/TIMERtoconrm.
» The timer is set and activated.
To deactivate or re-activate an alarm timer
1 In the standby mode, press SLEEP/TIMER
repeatedly.
» If the timer is activated,
is displayed.
» If the timer is deactivated,
disappears.
Tip
•
In MP3 link or AUX mode, the alarm timer cannot be
set.
• IfdiscorUSBsourceisselectedbutnoaudiolecan
be played, radio is activated automatically.
Set the sleep timer
This music system can switch to standby
automatically after a set period of time.
When the music system is turned on, press
SLEEP/TIMER repeatedly to select a set period
of time (in minutes).
» When sleep timer is activated,
is
displayed.
To deactivate sleep timer
Press SLEEP/TIMER repeatedly until [OFF] (off)
is displayed.
» When sleep timer is deactivated,
disappears on the display.
Play Karaoke
You can connect microphones and sing along
with a music source.
1 Turn MIC VOL to the minimum level.
2 Connect one or two microphone to the
microphone ports on the main unit.
3 Press CD 1/2/3, or TUNER, or USB, or
MP3 LINK, or PC IN/DOCK select the
source, and start play.
Comments to this Manuals