Philips DVDR 80 User Manual download pdf (Page 109)

OBefore you call technical support

If you have any problems using this DVD Recorder, it may be caused by one of the following

reasons. You can also call the customer service center in your country.

The telephone numbers can be found in the back of this owner's manual.

Have the model number (MODEL NO) and the production number (PROD.NO) ready.

The serial number (PROD. NO.) is printed on the type plate fixed at the rear of the set.

PROBLEM SOLUTION

Your DVD Recorder does

not respond to any button

being pressed, and 'IS TV

ON?' appears in the display:

bDevice is in initial installation mode: Switch on the TV, switch over to the DVD Recorder jack

or, if you have only connected the DVD Recorder to an antenna cable, select channel 3 or 4

on the TV.

Now the menu for language selection should appear. Read paragraph 'Initial Installation' in

'Installing your DVD Recorder'.

The device does not react

to the touch of a button,

the remote control is

working:

b'Dealer Mode' is on: All buttons at the front of the DVD Recorder are locked.

To switch off this function:

1 Disconnect the DVD Recorder from the power outlet.

2 Press and hold down h and OPEN/CLOSE J and re-connect the Recorder to

the power supply.

3 As soon as the time or '--:--' appears in the display (6 - 10 seconds), release h and

OPEN/CLOSE J .

Your DVD Recorder does

not respond to any button

being pressed.

bThere is no power. Check the power supply.

bA programmed recording (TIMER) is currently being made: If desired, cancel the programmed

recording (Timer) with STANDBY m .

bThere is a technical problem: Disconnect from the power outlet for 30 seconds, then connect

again.

If this doesn't help, reset your DVD Recorder to the default factory settings.

Resetting the DVD

Recorder to default factory

settings

bWarning:

All the information stored in the memory (programs, time, TIMER) will be reset (deleted).

1 Disconnect the DVD Recorder from the power outlet.

2 Press and hold down the STANDBY-ON m button on the front of the Recorder

while reconnecting to the power outlet.

3 Release STANDBY-ON m when a 'scrolling text' appears in the display. All the

information stored in the memory (programs, time, TIMER) will be reset (cleared).

Read paragraph 'Initial Installation' in 'Installing your DVD Recorder'.

Remote control does not

work:

bRemote control is not pointing at the device: Point the remote control at the DVD Recorder.

See if the 'o(((' appears on the display briefly each time you press a remote control button. If

it does, the Recorder is receiving information from the remote correctly.

bThere is a technical problem: Take out the batteries, wait for 10 seconds, and then re-insert

them.

bBatteries are weak: Replace the batteries.

No playback on DVD

Recorder:

bThere is no recording on the disc: Change disc.

bYou inserted the wrong disc type: Your Recorder can play the following disc types: DVD

Video, (Super)Video-CD, DVD+R(W), Audio-CD , MP3-CDs

bYou inserted the disc the wrong way: Insert the disc with the label facing up.

bThe disc is dirty. Clean the disc.

bWrong region code: The region code of the DVD and the DVD Recorder must match.

bThe child lock is on. Read chapter 'Access Control (Child Lock)'

bYou have selected or set the wrong channel number on the TV for the DVD Recorder: Select

the correct channel number on the TV (channel 3 or 4).

bThe cable connecting the TV and the DVD Recorder may be loose. Check the cable.

ENGLISH

Before you call technical support

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 227 228

Philips DVDR 80 User Manual Page 109

Comments to this Manuals

Philips DVDR 80 User Manual Page 109

Comments to this Manuals

Related products and manuals for DVD players Philips DVDR 80