Philips CEM5000 User Manual download pdf (Page 26)

27

The CD skips tracks

Ensure that the CD is not damaged or •

dirty.

Ensure that random mode is deactivated. •

Disc cannot be ejected

Press and hold •

.

Preset stations lost.

Battery cable is not correctly connected. •

Connect the battery cable to the terminal

that is always live.

Display show ERR-1

The disc, USB or SD device cannot be •

read in two minutes.

Display show ERR-3

USB/SD data error. •

Disc is upside down. Ensure the printed •

side is facing up.

Display show ERR-5

Communication error or component is •

damaged.

About Bluetooth device

Cannot pair the Bluetooth enabled device

with the car audio system.

The device does not support the proﬁles •

required for the system.

The Bluetooth function of the device is •

not enabled. Refer to the user manual of

the device for how to enable the function.

The audio quality is poor after connection

with a Bluetooth-enabled device.

The microphone is not correctly •

positioned. Adjust the position of the

microphone. For example, stick the

microphone onto the dashboard where

close to the driver.

The Bluetooth reception is poor. Move •

the device closer to the car audio system

or remove any obstacle between the

device and the system.

11 Troubleshooting

Caution

Never remove the casing of this apparatus. •

To keep the warranty valid, never try to repair

the system yourself.

If you encounter problems when using this

apparatus, check the following points before

requesting service. If the problem remains

unsolved, go to the Philips web site (www.

philips.com/support). When you contact Philips,

ensure that your apparatus is nearby and the

model number and serial number are available.

No power or no sound.

Car engine is not on. Turn the car engine •

on.

Cable is not correctly connected. Check •

connections.

Fuse is burnt. Replace fuse. •

Volume is too low. Adjust volume. •

If the above solutions cannot help, press •

the RESET button.

Ensure that the track played is of a •

compatible format.

Noise in broadcasts.

Signals are too weak. Select other •

stations with stronger signals.

Check the connection of the car antenna. •

Change broadcast from Stereo to mono. •

Cannot play disc

Ensure that the disc label is inserted with •

the printed side facing up.

Wipe the disc with ﬁbre cleaning cloth •

from the centre to the edge in a straight

line.

This disc may be defective. Play another •

disc.

Ensure that the CD is a ﬁnalised CD/ •

CD-R/CD-RW.

Ensure that the CD is not encoded with •

copyright protection technologies.

English

EN

1 2 ... 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments