Philips HTS3051B/F7 User Manual download pdf (Page 48)

SETUPS

This unit supports Philips EasyLink, which enables your TV

(limited to PHILIPS brand EasyLink TV) to act in

conjunction with this unit, or vice versa. Compliant TV

must be connected to the HDMI OUT jack.

When “EasyLink (HDMI CEC)” setting is set to “On”,

functions listed below will be available.

One Touch Play

When the operations with following buttons of the

remote control of this unit are performed, the TV will

automatically be turned on and switched to the

appropriate input channel.

Buttons for one touch play:

- [B (play)], [S (previous)], [T (next)],

[the Number buttons], [(home)], [INFO ], or

[SOURCE]

- [TOP MENU], or [DISC MENU / POP-UP MENU]

(when a disc is inserted in the unit)

Standby

When you press and hold [Q (standby/on)] for 2

seconds, it turns off the power of the TV first and then

turns off the power of this unit also.

System Information

Get & Set Menu Language

The unit recognizes the OSD language set for the TV and

automatically sets the same language as the player

menu language (OSD menu language) for this unit.

Refer to the “Player Menu” on page 38 for available

languages.

• This feature is available only when “Auto” is selected in

the “Player Menu” in the settings menu.

Set up the network connection settings in order to use

BD-Live or network upgrade function.

After you made IP address / DNS settings or when a LAN

cable is connected, always perform the connection test to

check if the connection is correctly made.

1) Use [K / L] to select “Settings” in the home menu,

then press [OK].

2) Use [K / L] to select “Advanced Setup”, then press

[OK].

3) Use [K / L] to select “Others”, then press [OK].

4) Use [K / L] to select “Network Connection”, then

press [OK].

5) Use [K / L] to select “Connection Test”, then press

[OK].

Connection test will start automatically and the test result

will appear right after the connection test finishes.

• “Testing...” : The test is in progress.

• “Pass” : Connection test is successfully completed.

• “Fail” : Connection test failed. Check the connection

settings.

Press [OK] to go to the list of network status confirmation

screen.

6) Press [OK] to go back to the previous screen, or

press [ (home)] to go back to the home menu.

EasyLink (HDMI CEC)

home A “Settings” A

“Advanced

Setup”

A “Others” A

“EasyLink

(HDMI CEC)”

Note

• For external input mode, “One Touch Play” is not

available.

Network Connection

Connection Test

home

“Settings”

“Advanced

Setup”

“Others”

“Network

Connection”

“Connection

Test”

Note

• If the connection test passes, you are ready to use

BD-Live or network upgrade function using the

Internet without making any extra settings.

• If the connection test fails, you may need to change

the MAC address settings on your router. You can

check the MAC address of this unit on “Network

Status” screen (refer to page 51).

• When connecting this unit directly to a modem for

the first time or connecting it to a modem which was

previously connected to any other network

device(e.g. a router, PC, etc.), you may have to

power cycle the modem to reset the settings on the

modem.

xxx.xxx.xxx.xxx

IP Address

Subnet Mask

Default Gateway

Primary DNS

Secondary DNS

then press 'OK'.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 61 62

Comments to this Manuals

No comments

Philips HTS3051B/F7 User Manual Page 48

Comments to this Manuals

Related products and manuals for Blu-Ray players Philips HTS3051B/F7