Philips AZ241517 User Manual download pdf (Page 7)

SPEAKERS

OPERATION

REMOVABLE SPEAKERS

Attaching the speakers

• Slide the speakers down into the sleeves on the sides of the

set cabinet. The speakers will click into position.

Taking off the speakers

• Keep the lever (found on the back corner of the speaker)

pressed and slide the speaker upwards.

Connecting the speakers

/. Connect the right speaker to the terminal R, with the red

marked wire to (+) and the black wire to (-).

2. Clip the exposed portion of wire into the corresponding colour

terminal.

3. Repeat the wiring procedure for the left speaker to terminal L,

making sure that you connect the red marked wire to + and

the black wire to -.

Positioning the speakers

The ideal position is obtained when the 2 front speakers and the

listening position build an equilateral triangle and the speakers

are at ear-height.

JVofe: - Speakers with an impedance of 8 ohms or higher other

than as supplied may be used instead. Do not, however,

use speakers with a lower impedance as this will result

in damage to your set.

- When headphones are connected to the headphone

socket ÍT the speakers are disconnected.

GENERAL OPERATION

1. To switch on the set, press the POWER button.

2. To select your sound source press the CD - TAPE - TUNER

button until the desired mode is shown in the display.

3. Adjust the volume using the VOLUME A, T buttons.

-* Display indication shows the level, 0-32 and VOL.

4. Adjust the sound effect by pressing the DSC button once or

more.

-* DBB, JAZZ or POP lights up when activated.

5. Create an enhanced surround sound by pressing the

INCREDIBLE SURROUND button.

-*The INCREDIBLE SURROUND button lights up when

activated.

6. To switch off the set, always press POWER so that the sound

and volume indicators do not remain lit after use.

1 2 3 4 5 6 7 8 ... 28

No comments

Philips AZ241517 User Manual Page 7