Philips 40PFL8605H-12 User Manual download pdf (Page 53)

4.5 Software

Current version

To view the current TV software version, press h > Setup >

Software settings and press OK. Select Current software info and

read Version: . . ..

Update from Internet

If the TV is connected to the Internet, you may receive a message

from Philips to update the TV software. You need a high-speed

Internet connection.

If you receive this message, we recommend you carry out the

update. Select Update. Follow the instructions on screen.

You can also look for new updates yourself. To look for an update,

press h > Setup > Update software and press OK. Follow the

instructions on screen.

When the update is complete, the TV switches itself off and back on

again automatically. Wait for the TV to switch itself back on. Do not

use the Power switch O on the TV.

Update with USB

It might be necessary to update the TV software. You need a PC

with an high-speed Internet connection and a USB memory device

to upload the software on the TV. Use an USB memory device with

256Mb free space. Make sure that write protection is switched off.

1 Start

2 Identify

3 Download

4 Update TV

1 Start the update on TV

To start the software update, press h > Setup > Update now.

2 Identify the TV

Insert the USB memory on the side of the TV, select Start and press

OK. An identification file is written on the USB memory.

3 Download the TV software

Insert the USB memory in your PC. On the USB memory, locate the

file update.htm and double click it. Click on Send ID. If new software

is available, download the .zip file. After the download, unzip the file

and copy the file autorun.upg onto the USB memory. Do not place

this file in a folder.

4 Update the TV software

Insert the USB memory in the TV again. The update starts

automatically. The TV switches itself off for 10 seconds and then

back on again. Please wait.

Do not . . .

• use the remote control

• remove the USB memory from the TV

If a power cut occurs during the update, never remove the USB

memory from the TV. When the power returns, the update will

continue.

At the end of the update, the message Operation succesful appears

on screen. Remove the USB memory and press O on the remote

control.

Do not . . .

• press O twice

• use the O switch on the TV

The TV switches itself off (for 10 seconds) and then back on again.

Please wait.

The TV software has been updated. You can use the TV again.

To prevent an accidental update of the TV software, delete the

autorun.upg file from the USB memory.

Setup / Software 53

1 ... 52 53 54 ... 91

Comments to this Manuals

No comments

Philips 40PFL8605H-12 User Manual Page 53

Comments to this Manuals

Related products and manuals for Video Philips 40PFL8605H-12