Philips vr 685 User Manual download pdf (Page 19)

Note: Channel number or frequency can also be entered

directly at step 3 , using the 0-9 buttons.

* To enter a special/hyperband channel, first enter the

channel digit ’9’. The indication changes from ’CH’ to ’CA’.

For example, for special channel ’S 30’, enter ’9 30’.

* Allocating a decoder: If you want to allocate a decoder,

press the INDEX E button at step 3 until ’DEC’ appears in

the display.

* This video recorder can receive HIFI sound transmissions

in ’NICAM’. At step 3 , you can switch ’NICAM’ off or on

with the SELECT button.

Before you call an engineer

If, contrary to expectation, you experience any difficulty in

operating this video recorder, it may be caused by one of the

reasons mentioned below. You can also call the customer

service in your country.

You will find the telephone numbers in the enclosed guarantee

leaflet.

The set does not respond to any button being pressed:

• No power supply.

• A programmed recording is currently being made.

• Child lock is active.

• Technical disturbance: disconnect from the mains for 30 sec-

onds, then re-connect. If this does not have any effect, you can:

1. Disconnect from mains.

2. Re-connect to mains whilst holding down the

STANDBY m

button on the video recorder. All stored data will be reset

(cleared).

Cassette jammed:

• Don’t use force. Pull out the mains plug for a moment.

Remote control does not operate:

• Remote control not pointed toward the video recorder.

• Batteries are exhausted.

No playback from video recorder:

• No recording on the cassette.

• The VCR programme number on the TV set was incorrectly

selected or incorrectly set.

• The connecting cable between the TV set and the video recorder

has come loose.

Poor playback from video recorder:

• TV set not properly adjusted.

• Cassette badly worn or of poor quality.

• Read the section about ’How to eliminate picture disturbance’ in

chapter ’PLAYBACK FUNCTIONS’.

No recording possible:

• TV channel not stored or wrongly selected.

• Cassette with erase protection has been loaded.

Programmed recording does not function:

• TIMER not set properly.

• Time/date wrongly programmed.

• A cassette with erase protection has been loaded.

• ’PDC’ or ’VPS’ switched on but ’PDC/VPS time’ wrong. Check

aerial.

Picture or sound interference on TV reception e.g. when

tuned to ’CH5’:

• Turn to Chapter 1 ’INSTALLATION’ and read in the section

’Connecting VCR without scart cable’ the note ’Adjusting the

modulator frequency’ , ’Automatic adjustment of modulator

frequency’ as well as the note ’Switching off the modulator’.

• Have your aerial checked.

Enter the serial number of your appliance here:

MODEL NO./TYPE VR685

PROD.NO.:/SER.NR. .....

This product complies with the requirements of the Directive

73/23/EEC + 89/336/EEC + 93/68/EEC.

Interference

The Department of Trade and Industry operates a Radio

Investigation Service to help TV licence holders improve

reception of BBC and ITC programmes where these are being

spoilt by interference.

If your dealer cannot help, ask at a Main Post Office for the

booklet ’How to Improve Television and Radio Reception’.

1 2 ... 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Philips vr 685 User Manual Page 19

Comments to this Manuals

Related products and manuals for Video recorders Philips vr 685