Philips FC6232/02 User Manual download pdf (Page 10)

Problem Possible cause Solution

The lamp goes on

and off as you

move the

appliance over

different colours

and materials.

The UV lamp is controlled

by a sensor in the bottom

of the appliance. This

sensor ensures that the

lamp goes out when the

appliance is 5cm off the

surface or the surface is

very dark.

The mode

indications on the

control panel do

not light up.

The appliance may

not be plugged in

properly.

Insert the plug into the wall

socket properly.

The voltage in your

home may not

correspond to

voltage indicated

on the appliance.

Check if the voltage in your

home is the same as the

voltage indicated on the

bottom of the appliance.

The appliance

beeps, the

tapping icon

flashes and the

red triangle lights

up.

The tapping feet do

not work because

they are blocked

by the fabric you

are cleaning.

Do not press the appliance

into the fabric too hard.

Make sure you apply light

pressure so that the

appliance glides over the

fabric easily.

The motor that

drives the tapping

feet may be

broken.

Take the appliance to your

dealer or a Philips service

centre. You can also

contact the Philips

Consumer Care Centre for

information.

The appliance

beeps, the UV

icon flashes and

the red triangle

lights up.

The infrared

sensors may be

dirty.

Clean the infrared sensors

with the cleaning brush.

12

English

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 81 82

Comments to this Manuals

No comments