Philips 328B6QJEB/00 User Manual download pdf (Page 30)

28

7. Troubleshooting & FAQs

Control Panel, select the 'Settings'

tab. Under the setting tab, in box

labelled 'desktop area', move the

sidebar to 2560 x 1440 pixels.

• Open 'Advanced Properties' and set

the Refresh Rate to 60 Hz, then click

OK.

• Restart your computer and repeat

step 2 and 3 to verify that your PC is

set at 2560 x 1440 @ 60 Hz.

• Shut down your computer,

disconnect your old display and

reconnect your Philips LCD display.

• Turn on your display and then turn

on your PC.

Q2: What is the recommended

refresh rate for LCD display?

Ans.: Recommended refresh rate in

LCD displays is 60 Hz, In case of

any disturbance on screen, you

can set it up to 75 Hz to see if

that removes the disturbance.

Q3: What are the .inf and .icm files on

the user manual? How do I install

the drivers (.inf and .icm)?

Ans.: These are the driver files for your

display. Follow the instructions

in your user manual to install the

drivers. Your computer may ask

you for display drivers (.inf and

.icm files) or a driver disk when

you first install your display.

Q4: How do I adjust the resolution?

Ans.: Your video card/graphic driver

and display together determine

the available resolutions. You

can select the desired resolution

under Windows

®

Control Panel

with the "Display properties".

Q5: What if I get lost when I am

making display adjustments via

OSD?

Ans.: Simply press the OK button, then

select 'Reset' to recall all of the

original factory settings.

Q6: Is the LCD screen resistant to

scratches?

Ans.: In general it is recommended

that the panel surface is not

subjected to excessive shocks

and is protected from sharp or

blunt objects. When handling the

display, make sure that there is

no pressure or force applied to

the panel surface side. This may

affect your warranty conditions.

Q7: How should I clean the LCD

surface?

Ans.: For normal cleaning, use a clean,

soft cloth. For extensive cleaning,

please use isopropyl alcohol. Do

not use other solvents such as

ethyl alcohol, ethanol, acetone,

hexane, etc.

Q8: Can I change the color setting of

my display?

Ans.: Yes, you can change your color

setting through OSD control as

the following procedures,

• Press "OK" to show the OSD (On

Screen Display) menu

• Press "Down Arrow" to select the

option "Color" then press "OK" to

enter color setting, there are three

settings as below.

1. Color Temperature: The six

settings are 5000K, 6500K,

7500K, 8200K, 9300K and

11500K. With settings in the

5000K range the panel appears

"warm, with a red-white

color tone", while a 11500K

temperature yields "cool,

bluewhite toning".

1 2 ... 25 26 27 28 29 30 31 32 33

Comments to this Manuals

No comments