Philips 190C1SB/00 User Manual download pdf (Page 24)

Regulatory Information

WARNING - THIS APPLIANCE MUST BE GROUNDING.

Important:

This apparatus is supplied with an approved moulded 13A

plug. To change a fuse in this type of plug proceed as

follows:

1. Remove fuse cover and fuse.

2. Fit new fuse which should be a BS 1362 5A,A.S.T.A. or

BSI approved type.

3. Refit the fuse cover.

If the fitted plug is not suitable for your socket outlets, it

should be cut off and an appropriate 3-pin plug fitted in its

place.

If the mains plug contains a fuse, this should have a value

of 5A. If a plug without a fuse is used, the fuse at the

distribution board should not be greater than 5A.

Note: The severed plug must be destroyed to avoid a

possible shock hazard should it be inserted into a 13A

socket elsewhere.

How to connect a plug

The wires in the mains lead are coloured in accordance

with the following code:

BLUE - "NEUTRAL" ("N")

BROWN - "LIVE" ("L")

GREEN & YELLOW - "GROUND" ("G")

1. The GREEN AND YELLOW wire must be connected to

the terminal in the plug which is marked with the letter "G"

or by the Ground symbol

or coloured GREEN or GREEN

AND YELLOW.

2. The BLUE wire must be connected to the terminal which

is marked with the letter "N" or coloured BLACK.

3. The BROWN wire must be connected to the terminal

which marked with the letter "L" or coloured RED.

Before replacing the plug cover, make certain that the cord

grip is clamped over the sheath of the lead - not simply

over the three wires.

file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/190C1/190C1-EDF...1.001/CD-Contents/lcd/manual/GERMAN/190C1/safety/REGS/REGULAT.HTM 第 9 頁 / 共 11 [98-05-12 10:37]

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 116 117

Comments to this Manuals

No comments

Philips 190C1SB/00 User Manual Page 24

Comments to this Manuals

Related products and manuals for TVs & monitors Philips 190C1SB/00