Philips D6051B/05 User Manual download pdf (Page 38)

36 EN

Tip

• When you access the answering machine remotely,

you are recommended to set the ring delay to[Toll

saver] mode. This is a cost effective way to manage

your messages. When there are new messages, the

answering machine picks up the call after 3 rings; When

there is no messages, it picks up the call after 5 rings.

Remote access

You can operate your answering machine when

you are away from home. Simply make a call to

your phone with a touch tone phone and enter

your 4-digit PIN/passcode.

Note

• The remote access PIN/passcode is the same as your

system PIN/passcode. The preset PIN/passcode is 0000.

Change the PIN/passcode

1 Select [Menu] > > [Remote access] >

[Change PIN], then press [OK] to conrm.

2 Enter the old PIN/passcode, then press

[OK] to conrm.

3 Enter the new PIN/passcode, then press

[OK] to conrm.

4 Enter the new PIN/passcode again, then

press [Save] to conrm.

» The setting is saved.

Activate/deactivate the remote access

You can allow or block remote access to the

answering machine.

1 Select [Menu] > > [Remote access],

then press [OK] to conrm.

2 Select [Activate] / [Deactivate], then press

[OK] to conrm.

» The setting is saved.

Access the answering machine remotely

1 Make a call to your home number with a

touch tone phone.

2 Enter # when you hear the announcement.

3 Enter your PIN/passcode.

» You now have access to your

answering machine, and you can listen

to the new messages.

Note

• You have 2 chances to enter the correct PIN/passcode

before your phone hangs up.

4 Press a key to carry out a function. See the

Remote access commands table below for

a list of available functions.

Note

• When there is no message, the phone hangs up

automatically if no key is pressed for 8 seconds.

Remote access commands

Key Function

1 Repeat the current or listen to the

previous message.

2 Listen to messages.

3 Skip to the next message.

6 Delete the current message.

7 Switch the answering machine on.

(not available when you listen to the

messages).

8 Stop listening to the message.

9 Switch the answering machine off.

(not available when you listen to the

messages).

Behavior of the LED display on the

base station

The table below shows you the current status

with different LED display behavior on the base

station.

LED

display

Answering

machine

status

Message status

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 53 54

Comments to this Manuals

No comments

Philips D6051B/05 User Manual Page 38

Comments to this Manuals

Related products and manuals for Telephones Philips D6051B/05