Philips STU 901/25R User Manual download pdf (Page 7)

Position your Philips STU 901

Satellite Receiver

The STU 901 is intended for use in a domestic environment

only and should never be operated or stored in excessively hot or

humid atmospheres.

Choose a position at some distance

away from radiators or other sources

of heat.

Leave a clear space of at least 3 cm

all around the set for ventilation.

Make sure that curtains, cupboards,

etc. cannot obstruct air flow through

the ventilation openings.

Insert batteries in the remote control

Remove the battery cover

located on the back of the

remote control handset.

Insert

three batteries

(type R03S1.5V).

Replace the battery cover.

Connect your satellite dish antenna

First, install the dish antenna and its receiving element - the Low

Noise Converter (LNC) - according to the manufacturer’s

instructions.

POWER jz:

ANTENNA

CONTROL

1 2 3

You must only set the Antenna

Control (28) to the required position

when the Receiver is switched off.

If necessary, press POWER (12) to

switch the Receiver off.

Position 1

No power is supplied to the LNC! Use

this position if the distance (cable

length) between the Receiver and the

dish antenna is more than 30 meters.

You may need an extra amplifier in

the cable from your Receiver to the

dish - ask your dealer for advice.

Position 2

If you have one or two LNCs.

This is the usual situation. In this

case, the Receiver supplies the LNC

via the cable (14 or 18 V,300 mA

max).

Position 3

Not used.

Connecting your Receiver

This section tells you how to connect the Philips STU 901

Satellite Receiver to the equipment you already have, such as a

TV and Video Cassette Recorder (VCR).

There are many connection options of which the most common

are:

A. To a TV only, using a Euroconnector.

B. To a TV only, using a coaxial cable

C. To a TV and a VCR, using Euroconnectors

D. To a TV and a VCR using coaxial cables

E. To a TV and an S-VHS VCR

Option A is the best if you have a TV only because it gives the

best picture and sound quality - especially with D2-MAC

programmes. You will obtain even better sound if you connect

the Receiver to your hi-fi system.

See Additional Connections below.

Select one of the connection options, then follow the step-by-step

instructions below:

1. Make the connections as shown in the drawing using the

Euroconnector supplied with your Receiver.

2. Connect your Receiver to the mains socket.

3. Switch your TV ON.

4. Switch your Receiver ON (12)

5. Press button number 0 on the Receiver remote control (6).

The programme number indicator (16) on your Receiver will

show 0. Press the MENU button (8) on the remote control.

You should now see the MAIN MENU on your screen

(see rear flap).

If not, you may have to select the AN input on your TV.

6. Press MENU OFF and go to the section Aim your dish.

<5b) 3

1 2 3 4 5 6 7 8 9 10 11 12 ... 29 30

Comments to this Manuals

No comments

Philips STU 901/25R User Manual Page 7

Comments to this Manuals

Related products and manuals for Satellite Philips STU 901/25R