Philips DS3880W User Manual download pdf (Page 10)

9

English

EN

4 Connect to

your home Wi-

Fi network for

AirPlay

To connect DS3880W to your existing home

Wi-Fi network, you need to apply your home

Wi-Fi setting to DS3880W.

You can do this in two ways (depending on

which type of Wi-Fi router you use):

 Automatically - if your Wi-Fi router is

WPS (Wi-Fi Protected Setup)-enabled

and supports PBC (Push Button

Connection) (see 'Scenario 1: Connect

to a WPS router' on page 9)

 Manually - if your Wi-Fi router does

not support WPS (see 'Scenario 2:

Connect to a non-WPS router' on

page 10)

Once connected successfully, DS3880W will

remember your home Wi-Fi settings. Then

you can enjoy AirPlay whenever DS3880W is

powered on and connected to your home Wi-

Fi network automatically.

Before connection of DS3880W to you home

Wi-Fi network, check the points below.

1 Make sure that your Wi-Fi router is

powered on and working properly.

2 Make sure that DS3880W has been

powered on and booted up successfully

(see 'Turn DS3880W on' on page 8).

3 Identify the type of your Wi-Fi router (see

the user manual of your Wi-Fi router for

details).

Scenario 1: Connect to a

WPS router

Note



Before you press any button on DS3880W, make sure

that DS3880W has been booted up successfully (see

'Turn DS3880W on' on page 8).

1 Press the WPS button on your home Wi-Fi

router.

2 Shortly after step 1, press Wi-Fi SETUP on

the back of DS3880W.

» The Wi-Fi SETUP indicator blinks red,

yellow and green alternately.

» Within 2 minutes, the WI-FI SETUP

indicator stops blinking and stays green,

and the unit beeps.

WPS

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 25 26

Comments to this Manuals

No comments