Philips CPWBS154 Specifications download pdf

Before You Start

This Before You Start guide will help you get your ADSL Wireless Base Station set up

and connected to the Internet quickly and easily. Just follow these steps:

1. Select a location for your Philips ADSL Wireless Base Station.

Install the ADSL Wireless Base Station near your PC or another location where you have

easy access. Keep ethernet cables away from power cords and other sources of electrical interference.

Place the ADSL Wireless Base Station, with the antennae in upright position, in a location where air

can circulate freely around it.

2. Plug the Power Supply into an appropriate electrical outlet.

Connect the other end to the Power Input on the back side of the ADSL Wireless Base Station.

Turn the power ON with the Off/On Switch.The LED light (PWR) should come on solid green.

3. Connect the ADSL Wireless Base Station to your ADSL RJ11 wall jack.

Plug one end of the black RJ-11 Telephone Cable into the port labeled “ADSL” on the ADSL

Wireless Base Station back panel until you feel it click. Insert the other end of the telephone cable

into the telephone jack (or filter/ splitter) connected to your ADSL service.

The ADSL light should blink for up to two minutes and then come on solid green.

4. Connect the Wireless Basestation + ADSL Modem to your computer

Connect one end of the RJ-45 Ethernet Cable to your PC’s Ethernet port and the other end to one

of the LAN ports of the ADSL Wireless Base Station.The LAN indicator light should come on solid

green for the port where you connected your Ethernet cable.

You should have all of these:

ADSL Wireless Base Station Manual on CD

Before you start card Grey RJ-45

Ethernet Cable

> > > Before you install the unit, check that your ADSL line is working correctly on the phone socket where you plan

to connect your Wireless Basestation + ADSL Modem. Make sure that you have properly installed a splitter

(not included, refer to your Service Provider documentation).

If you don ’t have everything, contact your supplier immediately.

Philips CPWBS154

ADSL Wireless Base Station

Step 1: Check your package contents

Step 2: Set up your ADSL Wireless Base Station

Step 3: Configure Your PC for Dynamic Addressing

Step 4: Configure Your Philips ADSL Wireless Base Station

Step 5: Configure Wireless Security (recommended)

Power Supply

Check your package contents

Step 1

Set up your Wireless Basestation + ADSL Modem

Step 2

Connect each computer or other device in your network to the ADSL Wireless Base Station with an

Ethernet cable or wirelessly.

A maximum of four computers or devices may access the Internet via the ADSL Wireless Base Station

at one time

LAN port 4 is not in use

CPWBS154 Front Panel System Messages

1. PWR • Green when power is on

2. ADSL • Blinking green when initializing

• Green when initialized

3. ON LINE • Green when Link is Up

• Blinking when sending and receiving data

4. WL • Off = Wireless disabled

• On = Wireless enabled

• Blinking = Wireless traffic

5. LAN 1, 2, 3, 4 • Green when connected to each port on the LAN

• Blinking green when there is activity on each port

Repeat these steps for each computer that you want to connect to your ADSL Wireless Base Station

A maximum of four computers or devices may access the Internet via the ADSL Wireless Base Station at one

time.

Microsoft Windows:

Step 1: Go to the TCP/ IP Properties settings on your computer by:

a). for Window 98, ME, and 2000 : Start menu > Settings > Control Panel > Network

(or Network and Dial-up Connections > Local Area

Connection > Properties) > TCP/IP [your network card]

or Internet protocol [TCP/IP] > Properties

b). for Window XP Click Start menu > Control Panel > Network and Internet

Connections > Network Connection > Local Area

Connection > Properties > Internet protocol [TCP/IP]

> Properties

Configure your PC for Dynamic Addressing

Step 3

Configure Your PC for Dynamic Addressing

Step 2: Select “Obtain an IP address automatically”.

Step 3: Select “Obtain DNS server address automatically”, if available.

Step 4: Remove any previously configured Gateways, if available.

Step 5: Click OK. Restart if prompted.

Proceed to the next section ‘Step 4: Configure Your Philips ADSL Wireless Base Station’

Macintosh Mac OS 9.2 and higher or Mac OS X 10.1.5 or higher:

Step 1: Access the TCP/ IP or Network control panel.

a. Mac OS 9 follows a path like this: Apple Menu > Control Panels > TCP/IP Control Panel

a. Mac OS X follows a path like this: Apple Menu > System Preferences > Network

Step 2: Select Built- in Ethernet.

Step 3: Select Configure Using DHCP.

Step 4: Close and Save, if prompted.

1. Open your Web browser (e.g. Netscape or Internet Explorer) from the computer that is

connected to the Wireless Basestation + ADSL Modem.

Enter http://192.168.1.1 in the URL Address text box and press the Enter key. In case The Philips ADSL

Wireless Base Station displays the Login Screen, click the “Login” button (leave the Password field blank) to

proceed to the Quickstart page.

2 .The Philips ADSL Wireless Base Station displays the Quickstart Web page.

Enter the Username and Password supplied by your Internet Service Provider.

3. Enable Wireless

The wireless function is enabled by default.

If you want to disable the wireless function

of the Wireless Base Station + ADSL Modem, you

can uncheck the “Enable Wireless” checkbox.

4. Enable Broadcast

The ADSL Wireless Base Station broadcasts its

Wireless ID by default.This means that the SSID will

appear as an available network when scanned for by

wireless- enabled devices. If you uncheck this check-

box, you must manually type in the identical SSID in your wireless devices in order to connect to the ADSL

Wireless Base Station network.

5.Wireless ID (SSID)

The Wireless ID is preset to “Philips WiFi”.You can either leave it as is, or change it. On client PCs’ software,

this might also be called the Network Name.The Wireless ID is used to identify this particular wireless

network. Please refer to the manual of your wireless client on how to connect to the ADSL Wireless

Base Station.

6. Click the “Save Changes” button.

Congratulations! Your installation is complete.You can now surf to your favorite websites by typing an URL

in your browser’s location box or by selecting one of your favorite Internet bookmarks.

Black RJ-11

Telephone Cable

ADSL Line

(Filter or Splitter)

(optional) (optional)

CPWBS154 Rear View

Configure your ADSL Wireless Base Station

Step 4

(optional)

1 2

Before You Start 1

Summary of Contents

Page 1 - Before You Start

Before You StartThis Before You Start guide will help you get your ADSL Wireless Base Station set up and connected to the Internet quickly and easily

Page 2

Philips CPWBS154ADSL Wireless Base StationBefore You StartYou can enter a MAC Address to the table by scrolling down and then selecting the computer

Philips CPWBS154 Specifications

Browse online or download Specifications for Networking Philips CPWBS154. Philips CPWBS154 Specifications User Manual

Summary of Contents

More documents for Networking Philips CPWBS154

Comments to this Manuals

Philips CPWBS154 Specifications

Browse online or download Specifications for Networking Philips CPWBS154. Philips CPWBS154 Specifications User Manual

Summary of Contents

More documents for Networking Philips CPWBS154

Comments to this Manuals

Related products and manuals for Networking Philips CPWBS154