Philips 32HFL5662L User Manual

User Manual22HFL5662H26HFL5662H32HFL4462F32HFL5662D32HFL5662H32HFL5662L37HFL4482F37HFL5682D37HFL5682L42HFL4482F42HFL5682D42HFL5682H42HFL5682L

83 InstallationSmart InstallationIn the 1st time (Virgin) installation, the OSD will instruct you step by step to do the TV installation setting.1.

9Install TV ChannelsThis TV is equipped with Helptext which will time out in 10 sec or upon Remote Control key press. Install TV Channels: This opt

10• Select Your RC Lock Settings: “No”, “Yes”.• This function enables/disables the processing of the Guest remote control signals. Installer remote

11• Set Your Minimum (0), Maximum (100), And Switch On (0-100) Volume.• Default switch on volume = 12• Any Welcome Message For Guest: “Yes”, “No”.•

12 » Press OK to select one of the four colors. The TV is confi gured to respond to the RC that is set to the same color. » Press the color button (sa

134 Home ScreenPress key to go to the Home Screen.Watch TVIn this option, you can use the cursor to select category you would like to see via OK key

USBUsing this option, you can select the files you want to play. For the “USB” option, you can do the setting for following options in sub-menu:• “Fo

15• CC Setup: “CC”— “Off”, “On”, “CC on Mute”• This feature allows the Closed Captions settings of this TV to be customized. Any changes made in thi

165 OptionPress OPTIONS key on the Guest Remote Control to enter the Option Menu Setting: Audio Language:• Displays options (if available) SAP allo

176 Hotel SettingPress M on the Setup Remote Control to display the Hotel Setup Menu.Hotel and Room InformationSelect this option can set the hotel in

Contents1 Notice 1Safety information and useful tips 1Important Safety Instructions 2OSS declaration 3Cleaning and care 3Environmental care 42

18 Current Ring: “Ring1”, “Ring2”, “Ring3”, “Ring4”. Only those channels assigned to the “Current Ring” will be available to the guest. NoteChannels

19 Selectable AV (selecting Yes/No for these items adds or removes them from the list of available sources when the guest presses the Source button

20 MultiRC: “Off”, “Blue”, “Yellow”, “Green”, “Red” This function enables control of multiple TVs in a room without any interference from each oth

21Installer TV SettingsThis section allows the Installer to customize the TV performance and general settings. Language: “English”, “Spanish”, “Fre

22 Control: “Digit Timeout”, “3-Digit Entry”, “Step Tuning”, “HDMI-CEC” This section allows the Installer to customizes the Control and Performanc

23 Power On: “Last Status”, “On”, “Standby”, “Forced On”. Default setting is “Standby”. When power to the TV is interrupted, this function sets the

24 RF Channel Number: This function selects the RF channel number where the TV can find the clone data. Note that both the PSG must be set to broad

25 Upgrade Type: “All”, ”Software Upgrade Package”, “Software Asset Package” This section Select the type of software to be upgraded to the TV. •

267 Overview of TV connectors and controlsL/D/H modelHDMI 1HDMI 2HDMI 3DATA 1HDMI 1HDMI 2HDMI 3DATA 1gh ijknoplmqVGA INPC-AUDIOINUSBSIDE HDMIVIDEO

27F modelsHDMI 1HDMI 2HDMI 3DATA 1HDMI 1DATA 1ghkijVGA INPC-AUDIOINUSBSIDE HDMIVIDEO INLAUDIO INRabcdefla VIDEO INb AUDIO IN L/Rc VGA INd PC-AUDI

1Safety information and useful tips1. Two people are required to lift and carry a TV that weighs more than 55 lb (25 kg). Improper handling of the

288 GlossaryAspect RatioThe ratio between the width and height of the TV picture on the screen. An old analog TV has an aspect ratio of 4 to 3 (4:3).

29

© 2010 Koninklijke Philips Electronics N.V.All rights reserved.

2Important Safety InstructionsRead before operating equipment1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow

32010 © Koninklijke Philips Electronics N.V. All rights reserved. Specifications are subject to change without notice. Trademarks are the property of

4Screen care and sterilizationAvoid stationary images as much as possible. Stationary images are images that remain on-screen for extended periods of

52 Your TVStandalone installation and side controlsThis section describes how to install the TV channels automatically.1. Connect the RF signal fro

6Guest remote control (optional)a POWER: Press to turn on/off the TV from or to standby mode.b HOME: Toggles the main menu on or off.c SOURCE: Sel

7Philips Hospitality setup remote control (not included in box)A B C DERECALL/INFOF G RESET/UPGRADEGUIDEBACK/PPALARM/CLOCKOPTIONSHOMEMENUSMARTTELETEXT